Link Bundling in MPLS Traffic Engineering
draft-kompella-mpls-bundle-05
Document | Type |
Expired Internet-Draft
(individual)
Expired & archived
|
|
---|---|---|---|
Authors | Kireeti Kompella , Yakov Rekhter , Lou Berger | ||
Last updated | 2001-03-02 | ||
RFC stream | (None) | ||
Intended RFC status | (None) | ||
Formats | |||
Stream | Stream state | (No stream defined) | |
Consensus boilerplate | Unknown | ||
RFC Editor Note | (None) | ||
IESG | IESG state | Expired | |
Telechat date | (None) | ||
Responsible AD | (None) | ||
Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
In some cases a pair of Label Switching Routers (LSRs) may be connected by several (parallel) links. From the MPLS Traffic Engineering point of view for reasons of scalability it may be desirable to advertise all these links as a single link into OSPF and/or IS-IS. This document describes how to accomplish this. This document also defines corresponding signaling (RSVP-TE) support.
Authors
Kireeti Kompella
Yakov Rekhter
Lou Berger
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)