Frame Relay Transport and Encapsulatiion over Psevdo-Wires
draft-kamapabhava-fr-pwe3-01

Document Type Expired Internet-Draft (individual)
Authors Claude Kawa  , Andy Malis  , Prayson Pate  , Ravi Bhat  , Nishit Vasavada 
Last updated 2002-04-15
Stream (None)
Intended RFC status (None)
Formats
Expired & archived
pdf htmlized bibtex
Stream Stream state (No stream defined)
Consensus Boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Expired
Telechat date
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft can be found at
https://www.ietf.org/archive/id/draft-kamapabhava-fr-pwe3-01.txt

Abstract

This document defines frame relay pseudo-wire specific aspects. A frame relay pseudo wire exists between network edge nodes and support as faithfully as possible an instance of a frame relay service. A frame relay pseudo-wire is a mechanism that allows frame relay protocol control information and payload to be carried over IP or MPLS Packet Switched Networks.

Authors

Claude Kawa (claude.kawa@sympatico.ca)
Andy Malis (Andy.Malis@tellabs.com)
Prayson Pate (prayson.pate@overturenetworks.com)
Ravi Bhat (rbhat@ambernetworks.com)
Nishit Vasavada (nishit@ambernetworks.com)

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)