Technical Summary
This document describes how NAT64 (including 464XLAT) can be deployed
in an IPv6 network, whether cellular ISP, broadband ISP, or
enterprise, and possible optimizations. The document also discusses
issues to be considered when having IPv6-only connectivity,
regarding: a) DNS64, b) applications or devices that use literal IPv4
addresses or non-IPv6 compliant APIs, and c) IPv4-only hosts or
applications.
Working Group Summary
The draft started its life as draft-palet-v6ops-464xlat-deployment in October 2017, then evolved into draft-palet-v6ops-nat64-deployment in March 2018 as a
NAT64 deployment guideline document intended to be BCP. It was adopted as a working group document as draft-ietf-v6ops-nat64-deployment in July 2018 with changed intended status to Informational.
The discussions in the WG has been supportive of the draft, the author has taken feedback/suggestions into account and over time evolved/progressed the document during productive discussions. There has been no general opposition to the draft itself apart from people opposing on principle on DNS64 "breaking"
DNSSEC. That is not the fault of this draft and this draft suggests no technological changes.
Document Quality
The document describes technology implemented by numerous networks and devices, primarily in mobile networks. The author proposes this technology to be used in more deployment scenarios and that's the motivation for this draft, to analyse the deployment considerations for other types of network types. The document has received substantial technical and stylistic feedback and I believe the document is in good technical shape. The RFC editor might have some linguistic/grammar/stylistic work to do on this draft, but I believe this is normal when the author is non-native english speaker/writer.
Personnel
Shepherd: Mikael Abrahamsson
RAD: Warren Kumari