PCEP Extensions for PCE-initiated LSP Setup in a Stateful PCE Model
draft-ietf-pce-pce-initiated-lsp-07

The information below is for an old version of the document
Document Type Expired Internet-Draft (pce WG)
Authors Edward Crabbe  , Ina Minei  , Siva Sivabalan  , Robert Varga 
Last updated 2017-01-19 (latest revision 2016-07-18)
Stream Internet Engineering Task Force (IETF)
Formats
Expired & archived
pdf htmlized (tools) htmlized bibtex
Reviews
Additional Resources
- Mailing list discussion
Stream WG state WG Consensus: Waiting for Write-Up
Document shepherd Julien Meuric
Shepherd write-up Show (last changed 2016-11-29)
IESG IESG state Expired
Consensus Boilerplate Unknown
Telechat date
Responsible AD (None)
Send notices to "Julien Meuric" <julien.meuric@orange.com>

This Internet-Draft is no longer active. A copy of the expired Internet-Draft can be found at
https://www.ietf.org/archive/id/draft-ietf-pce-pce-initiated-lsp-07.txt

Abstract

The Path Computation Element Communication Protocol (PCEP) provides mechanisms for Path Computation Elements (PCEs) to perform path computations in response to Path Computation Clients (PCCs) requests. The extensions for stateful PCE provide stateful control of Multiprotocol Label Switching (MPLS) Traffic Engineering Label Switched Paths (TE LSP) via PCEP, for a model where the PCC delegates control over one or more locally configured LSPs to the PCE. This document describes the creation and deletion of PCE-initiated LSPs under the stateful PCE model.

Authors

Edward Crabbe (edward.crabbe@gmail.com)
Ina Minei (inaminei@google.com)
Siva Sivabalan (msiva@cisco.com)
Robert Varga (robert.varga@pantheon.tech)

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)