Factory Default Setting
draft-ietf-netmod-factory-default-07

Document Type Active Internet-Draft (netmod WG)
Last updated 2019-11-17
Replaces draft-wu-netmod-factory-default
Stream IETF
Intended RFC status (None)
Formats plain text xml pdf htmlized bibtex
Yang Validation 0 errors, 0 warnings.
Reviews
Additional URLs
- Yang catalog entry for ietf-factory-default@2019-05-03.yang
- Yang impact analysis for draft-ietf-netmod-factory-default
- Mailing list discussion
Stream WG state In WG Last Call
Document shepherd Kent Watsen
IESG IESG state I-D Exists
Consensus Boilerplate Unknown
Telechat date
Responsible AD (None)
Send notices to Kent Watsen <kent+ietf@watsen.net>
NETMOD Working Group                                               Q. Wu
Internet-Draft                                                    Huawei
Intended status: Standards Track                              B. Lengyel
Expires: May 20, 2020                                   Ericsson Hungary
                                                                  Y. Niu
                                                                  Huawei
                                                       November 17, 2019

                        Factory Default Setting
                  draft-ietf-netmod-factory-default-07

Abstract

   This document defines a method to reset a server to its factory-
   default content.  The reset operation may be used, e.g., when the
   existing configuration has major errors so re-starting the
   configuration process from scratch is the best option.

   A new factory-reset RPC is defined.  When resetting a datastore, all
   previous configuration settings will be lost and replaced by the
   factory-default content.

   A new optional "factory-default" read-only datastore is defined, that
   contains the data that will be copied over to the running datastore
   at reset.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at https://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on May 20, 2020.

Wu, et al.                Expires May 20, 2020                  [Page 1]
Internet-Draft           Factory Default Setting           November 2019

Copyright Notice

   Copyright (c) 2019 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (https://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   2
     1.1.  Terminology . . . . . . . . . . . . . . . . . . . . . . .   3
   2.  Factory-Reset RPC . . . . . . . . . . . . . . . . . . . . . .   3
   3.  Factory-Default Datastore . . . . . . . . . . . . . . . . . .   4
   4.  YANG Module . . . . . . . . . . . . . . . . . . . . . . . . .   5
   5.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .   7
   6.  Security Considerations . . . . . . . . . . . . . . . . . . .   7
   7.  Acknowledgements  . . . . . . . . . . . . . . . . . . . . . .   8
   8.  Contributors  . . . . . . . . . . . . . . . . . . . . . . . .   8
   9.  References  . . . . . . . . . . . . . . . . . . . . . . . . .   8
     9.1.  Normative References  . . . . . . . . . . . . . . . . . .   8
     9.2.  Informative References  . . . . . . . . . . . . . . . . .   9
   Appendix A.  Changes between revisions  . . . . . . . . . . . . .   9
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  11

1.  Introduction

   This document defines a method to reset a server to its factory-
   default content.  The reset operation may be used, e.g., when the
   existing configuration has major errors so re-starting the
   configuration process from scratch is the best option.

   A factory-reset RPC is defined.  When resetting a datastore, all
   previous configuration settings will be lost and replaced by the
   factory-default content.

   A "factory-default" read-only datastore is defined, that contains the
   data to replace the contents of implemented read-write conventional
   configuration datastores at reset.  This datastore can also be used
   in <get-data> operation.

Wu, et al.                Expires May 20, 2020                  [Page 2]
Internet-Draft           Factory Default Setting           November 2019

   NETCONF defines the <delete-config> RPC operation, but that only acts
   on the <startup-datastore>, whereas the <factory-reset> RPC operation
   can perform additional changes to the device to fully reset the
   device back to a factory-default state

   The YANG data model in this document conforms to the Network
   Management Datastore Architecture defined in [RFC8342].

1.1.  Terminology

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in BCP
   14 [RFC2119] [RFC8174] when, and only when, they appear in all
   capitals, as shown here.

   The following terms are defined in [RFC8342] [RFC7950] and are not
   redefined here:

   o  server

   o  startup configuration datastore

   o  candidate configuration datastore

   o  running configuration datastore

   o  intended configuration datastore

   o  operational state datastore

   o  conventional configuration datastore

   o  RPC operation

   The following terms are defined in this document as follows:

   o  factory-default datastore: A read-only configuration datastore
      holding a preconfigured minimal initial configuration that can be
      used to initialize the configuration of a server.  The content of
      the datastore is usually static, but MAY depend on external
      factors like available HW.

2.  Factory-Reset RPC

   A new "factory-reset" RPC is introduced.  Upon receiving the RPC

Wu, et al.                Expires May 20, 2020                  [Page 3]
Internet-Draft           Factory Default Setting           November 2019

   o  All supported conventional read-write configuration datastores
      (i.e. <running>, <startup>, and <candidate>) are all reset to the
      contents of <factory-default>.

   o  Read-only datastores receive their content from other
      datastores(e.g. <intended> gets its content from <running>).

   o  All data in any ephemeral datastores MUST be discarded.

   o  The contents of the <operational> datastore MUST be reset back to
      an appropriate factory-default state.

   In addition, the "factory-reset" RPC MUST restore storage to factory
   condition, including remove log files, remove temporary files (from
   datastore or elsewhere).  It MUST also remove security credentials
   and restoring default security settings including remove
   certificates, keys, zero passwords, etc.  The process invoked by the
   "factory-reset" RPC SHOULD zero/pattern-write than remove sensitive
   files such as the TLS keys, configuration stores, etc.  The "factory-
   reset" RPC MAY also be used to trigger some other resetting tasks
   such as restarting the node or some of the software processes.

3.  Factory-Default Datastore

   Following guidelines for defining Datastores in the appendix A of
   [RFC8342], this document introduces a new optional datastore resource
   named 'factory-default' that represents a preconfigured minimal
   initial configuration that can be used to initialize the
   configuration of a server.  A device MAY only implement the <factory-
   reset> RPC without implementing the 'factory-default' datastore,
   which make it lose the ability to see what configuration the device
   would be reset back to.

   o  Name: "factory-default"

   o  YANG modules: all

   o  YANG nodes: all "config true" data nodes

   o  Management operations: The content of the datastore is set by the
      server in an implementation dependent manner.  The content can not
      be changed by management operations via NETCONF, RESTCONF,the CLI
      etcunless specialized, dedicated operations are provided.  The
      datastore can be read using the standard NETCONF/RESTCONF protocol
      operations.  The <factory- reset> operation copies the factory
      default content to <running> and, if present, <startup> and then
      the content of these datastores is propagated automatically to any
      other read only datastores, e.g., <intended> and <operational>.

Wu, et al.                Expires May 20, 2020                  [Page 4]
Internet-Draft           Factory Default Setting           November 2019

   o  Origin: This document does not define a new origin identity as it
      does not interact with <operational> datastore.

   o  Protocols: RESTCONF, NETCONF and other management protocol.

   o  Defining YANG module: "ietf-factory-default".

   The datastore content is usually defined by the device vendor.  It is
   usually static, but MAY change e.g., depending on external factors
   like HW available or during device upgrade.

   The contents of <factory-default> MUST persist across device
   restarts.

4.  YANG Module

   This module imports typedefs from [RFC8342], and it references
   [RFC6421],[RFC8341].

<CODE BEGINS> file "ietf-factory-default.yang"
   module ietf-factory-default {
     yang-version 1.1;
     namespace "urn:ietf:params:xml:ns:yang:ietf-factory-default";
     prefix fd;

     import ietf-datastores {
       prefix ds;
     }
     import ietf-netconf-acm {
       prefix nacm;
     }

     organization
       "IETF NETMOD (Network Modeling) Working Group";
     contact
       "WG Web:   <https://tools.ietf.org/wg/netconf/>
        WG List:  <mailto:netconf@ietf.org>

        Editor:   Qin Wu
                  <mailto:bill.wu@huawei.com>
        Editor:   Balazs Lengyel
                  <mailto:balazs.lengyel@ericsson.com>
        Editor:   Ye Niu
                  <mailto:niuye@huawei.com>";
     description
       "This module defines the
        - factory-reset RPC
        - factory-default datastore

Wu, et al.                Expires May 20, 2020                  [Page 5]
Internet-Draft           Factory Default Setting           November 2019

        It provides functionality to reset a server to its
        factory-default content.

        Copyright (c) 2019 IETF Trust and the persons identified as
        authors of the code.  All rights reserved.

        Redistribution and use in source and binary forms, with or
        without modification, is permitted pursuant to, and subject
        to the license terms contained in, the Simplified BSD License
        set forth in Section 4.c of the IETF Trust's Legal Provisions
        Relating to IETF Documents
        (http://trustee.ietf.org/license-info).

        This version of this YANG module is part of RFC XXXX;
        see the RFC itself for full legal notices.";

     revision 2019-05-03 {
       description
         "Initial revision.";
       reference
         "RFC XXXX: Factory default Setting";
     }

     feature factory-default-datastore {
       description
         "Indicates that the factory default configuration is
          available as a datastore.";
     }

     rpc factory-reset {
       nacm:default-deny-all;
       description
         "The server resets the content of all read-write
          configuration datastores (i.e.,<running> , <startup><candidate>) to
          their factory default content.";
     }

     identity factory-default {
       if-feature "factory-default-datastore";
       base ds:datastore;
       description
         "This read-only datastore contains the configuration data used to
          replace the contents ofthe read-write conventional configuration
          datastores during a factory-reset RPC operation.";
     }
   }

<CODE ENDS>

Wu, et al.                Expires May 20, 2020                  [Page 6]
Internet-Draft           Factory Default Setting           November 2019

5.  IANA Considerations

   This document registers one URI in the IETF XML Registry [RFC3688].
   The following registration has been made:

      URI: urn:ietf:params:xml:ns:yang:ietf-factory-default

      Registrant Contact: The IESG.

      XML: N/A, the requested URI is an XML namespace.

   This document registers one YANG module in the YANG Module Names
   Registry [RFC6020].  The following registration has been made:

      name: ietf-factory-default

      namespace: urn:ietf:params:xml:ns:yang:ietf-factory-default

      prefix: fd

      RFC: xxxx

6.  Security Considerations

   The YANG module defined in this document extends the base operations
   for NETCONF [RFC6241] and RESTCONF [RFC8040].  The lowest NETCONF
   layer is the secure transport layer, and the mandatory-to-implement
   secure transport is Secure Shell (SSH) [RFC6242].  The lowest
   RESTCONF layer is HTTPS, and the mandatory-to-implement secure
   transport is TLS [RFC8446].

   The <factory-reset> RPC operation may be considered sensitive in some
   network enviroments,e.g., remote access to reset the device or
   overwrite security sensitive information in one of the other
   datastores, e.g. running, therefore it is important to restrict
   access to this RPC using the standard access control methods.
   [RFC8341]

   The 'factory-reset' RPC can prevent any further management of the
   device if the session and client config is included in the factory-
   reset contents.

Wu, et al.                Expires May 20, 2020                  [Page 7]
Internet-Draft           Factory Default Setting           November 2019

   The operational disruption caused by setting the config to factory-
   reset contents varies greatly depending on the implementation and
   current config.

7.  Acknowledgements

   Thanks to Juergen Schoenwaelder, Ladislav Lhotka, Alex Campbell, Joe
   Clarke, Robert Wilton, Kent Watsen, Joel Jaeggli, Lou Berger, Andy
   Bierman, Susan Hares to review this draft and provide important input
   to this document.

8.  Contributors

      Rohit R Ranade
      Huawei
      Email: rohitrranade@huawei.com

9.  References

9.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/info/rfc2119>.

   [RFC7950]  Bjorklund, M., Ed., "The YANG 1.1 Data Modeling Language",
              RFC 7950, DOI 10.17487/RFC7950, August 2016,
              <https://www.rfc-editor.org/info/rfc7950>.

   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/info/rfc8174>.

   [RFC8341]  Bierman, A. and M. Bjorklund, "Network Configuration
              Access Control Model", STD 91, RFC 8341,
              DOI 10.17487/RFC8341, March 2018,
              <https://www.rfc-editor.org/info/rfc8341>.

   [RFC8342]  Bjorklund, M., Schoenwaelder, J., Shafer, P., Watsen, K.,
              and R. Wilton, "Network Management Datastore Architecture
              (NMDA)", RFC 8342, DOI 10.17487/RFC8342, March 2018,
              <https://www.rfc-editor.org/info/rfc8342>.

Wu, et al.                Expires May 20, 2020                  [Page 8]
Internet-Draft           Factory Default Setting           November 2019

9.2.  Informative References

   [I-D.ietf-netmod-yang-instance-file-format]
              Lengyel, B. and B. Claise, "YANG Instance Data File
              Format", draft-ietf-netmod-yang-instance-file-format-04
              (work in progress), August 2019.

   [RFC8572]  Watsen, K., Farrer, I., and M. Abrahamsson, "Secure Zero
              Touch Provisioning (SZTP)", RFC 8572,
              DOI 10.17487/RFC8572, April 2019,
              <https://www.rfc-editor.org/info/rfc8572>.

Appendix A.  Changes between revisions

   Editorial Note (To be removed by RFC Editor)

   v06 - 07

   o  Remove Factory-default content specification;

   o  Remove reference to YANG instance data file format and zero touch
      provision [RFC8573];

   o  Remove copy-config operation extension on factory-default
      datastore

   v05 - 06

   o  Additional text to enhance security section.

   o  Add nacm:default-deny-all on "factory-reset" RPC.

   o  A few clarification on Factory-default content specification.

   v03 - 04

   o  Additional text to clarify factory-reset RPC usage.

   v02 - 03

   o  Update security consideration section.

   v01 - v02

   o  Address security issue in the security consideration section.

   o  Remove an extension to the NETCONF <copy-config> operation which
      allows it to operate on the factory-default datastore.

Wu, et al.                Expires May 20, 2020                  [Page 9]
Internet-Draft           Factory Default Setting           November 2019

   o  Add an extension to the NETCONF <get-config> operation which
      allows it to operate on the factory-default datastore.

   v00 - v01

   o  Change YANG server into server defined in NMDA architecture based
      on discussion.

   o  Allow reset the content of all read-write configuraton datastores
      to its factory-default content except <candidate>.

   o  Add clarification text on factory-reset protocol operation
      behavior.

   v03 - v00

   o  Change draft name from draft-wu to draft-ietf-netmod-factory-
      default-00 without content changes.

   v02 - v03

   o  Change reset-datastore RPC into factory-reset RPC to allow reset
      the whole device with factory default content.

   o  Remove target datastore parameter from factory-reset RPC.

   o  Other editorial changes.

   v01 - v02

   o  Add copy-config based on Rob's comment.

   o  Reference Update.

   v03 - v00 - v01

   o  Changed name from draft-wu-netconf-restconf-factory-restore to
      draft-wu-netmod-factory-default

   o  Removed copy-config ; reset-datastore is enough

   v02 - v03

   o  Restructured

   o  Made new datastore optional

   o  Removed Netconf capability

Wu, et al.                Expires May 20, 2020                 [Page 10]
Internet-Draft           Factory Default Setting           November 2019

   o  Listed Open issues

   v01 - v02

   o  -

   v00 - v01

   o  -

Authors' Addresses

   Qin Wu
   Huawei
   101 Software Avenue, Yuhua District
   Nanjing, Jiangsu  210012
   China

   Email: bill.wu@huawei.com

   Balazs Lengyel
   Ericsson Hungary
   Magyar Tudosok korutja 11
   1117 Budapest
   Hungary

   Phone: +36-70-330-7909
   Email: balazs.lengyel@ericsson.com

   Ye Niu
   Huawei

   Email: niuye@huawei.com

Wu, et al.                Expires May 20, 2020                 [Page 11]