Skip to main content

A YANG Data Model for MPLS Static LSPs
draft-ietf-mpls-static-yang-11

The information below is for an old version of the document.
Document Type
This is an older version of an Internet-Draft whose latest revision state is "Active".
Expired & archived
Authors Tarek Saad , Rakesh Gandhi , Xufeng Liu , Vishnu Pavan Beeram , Igor Bryskin
Last updated 2020-10-22 (Latest revision 2020-04-20)
Replaces draft-saad-mpls-static-yang
RFC stream Internet Engineering Task Force (IETF)
Formats
Reviews
Additional resources Mailing list discussion
Stream WG state WG Document
Document shepherd (None)
IESG IESG state Expired
Consensus boilerplate Unknown
Telechat date (None)
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

Abstract

This document contains the specification for the MPLS Static Label Switched Paths (LSPs) YANG model. The model allows for the provisioning of static LSP(s) on Label Edge Router(s) LER(s) and Label Switched Router(s) LSR(s) devices along a LSP path without the dependency on any signaling protocol. The MPLS Static LSP model augments the MPLS base YANG model with specific data to configure and manage MPLS Static LSP(s).

Authors

Tarek Saad
Rakesh Gandhi
Xufeng Liu
Vishnu Pavan Beeram
Igor Bryskin

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)