Resilient MPLS Rings and Multicast
draft-ietf-mpls-rmr-multicast-00

Document Type Expired Internet-Draft (mpls WG)
Last updated 2020-02-14 (latest revision 2019-08-13)
Replaces draft-zzhang-mpls-rmr-multicast
Stream IETF
Intended RFC status (None)
Formats
Expired & archived
pdf htmlized bibtex
Stream WG state WG Document
Document shepherd No shepherd assigned
IESG IESG state Expired
Consensus Boilerplate Unknown
Telechat date
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft can be found at
https://www.ietf.org/archive/id/draft-ietf-mpls-rmr-multicast-00.txt

Abstract

With Resilient MPLS Rings (RMR), although all existing multicast procedures and solutions can work as is, there are optimizations that could be done for RSVP-TE P2MP tunnel signaling and Fast-ReRouting for both mLDP and RSVP-TE P2MP tunnels. This document describes RMR multicast on a high level, with detailed protocol procedure for RSVP- TE P2MP optimizations specified in a separate document. This document also discusses end to end multicast when there are RMRs.

Authors

Zhaohui Zhang (zzhang@juniper.net)
Santosh Esale (sesale@juniper.net)

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)