The Use of Entropy Labels in MPLS Forwarding
draft-ietf-mpls-entropy-label-01

The information below is for an old version of the document
Document Type Expired Internet-Draft (mpls WG)
Authors John Drake  , Kireeti Kompella  , Lucy Yong  , Shane Amante  , Wim Henderickx 
Last updated 2012-05-03 (latest revision 2011-10-31)
Replaces draft-kompella-mpls-entropy-label
Stream IETF
Intended RFC status (None)
Formats
Expired & archived
pdf htmlized (tools) htmlized bibtex
Reviews
Additional Resources
- Mailing list discussion
Stream WG state WG Document
Document shepherd None
IESG IESG state Expired
Consensus Boilerplate Unknown
Telechat date
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft can be found at
https://www.ietf.org/archive/id/draft-ietf-mpls-entropy-label-01.txt

Abstract

Load balancing is a powerful tool for engineering traffic across a network. This memo suggests ways of improving load balancing across MPLS networks using the concept of "entropy labels". It defines the concept, describes why entropy labels are useful, enumerates properties of entropy labels that allow maximal benefit, and shows how they can be signaled and used for various applications.

Authors

John Drake (jdrake@juniper.net)
Kireeti Kompella (kireeti@juniper.net)
Lucy Yong (lucyyong@huawei.com)
Shane Amante (shane@level3.net)
Wim Henderickx (wim.henderickx@alcatel-lucent.com)

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)