Skip to main content

JSON Meta Application Protocol (JMAP) for Quotas
RFC 9425

Document Type RFC - Proposed Standard (June 2023)
Author René Cordier
Last updated 2023-06-20
RFC stream Internet Engineering Task Force (IETF)
Formats
Additional resources Mailing list discussion
IESG Responsible AD Murray Kucherawy
Send notices to (None)
RFC 9425


Internet Engineering Task Force (IETF)                   R. Cordier, Ed.
Request for Comments: 9425                              Linagora Vietnam
Category: Standards Track                                      June 2023
ISSN: 2070-1721

            JSON Meta Application Protocol (JMAP) for Quotas

Abstract

   This document specifies a data model for handling quotas on accounts
   with a server using the JSON Meta Application Protocol (JMAP).

Status of This Memo

   This is an Internet Standards Track document.

   This document is a product of the Internet Engineering Task Force
   (IETF).  It represents the consensus of the IETF community.  It has
   received public review and has been approved for publication by the
   Internet Engineering Steering Group (IESG).  Further information on
   Internet Standards is available in Section 2 of RFC 7841.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be obtained at
   https://www.rfc-editor.org/info/rfc9425.

Copyright Notice

   Copyright (c) 2023 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (https://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Revised BSD License text as described in Section 4.e of the
   Trust Legal Provisions and are provided without warranty as described
   in the Revised BSD License.

Table of Contents

   1.  Introduction
     1.1.  Notational Conventions
     1.2.  Terminology
   2.  Addition to the Capabilities Object
     2.1.  urn:ietf:params:jmap:quota
   3.  Sub-types of the Quota Data Type
     3.1.  Scope
     3.2.  ResourceType
   4.  Quota
     4.1.  Properties of the Quota Object
     4.2.  Quota/get
     4.3.  Quota/changes
     4.4.  Quota/query
     4.5.  Quota/queryChanges
   5.  Examples
     5.1.  Fetching Quotas
     5.2.  Requesting Latest Quota Changes
   6.  Push
   7.  IANA Considerations
     7.1.  JMAP Capability Registration for "quota"
     7.2.  JMAP Data Type Registration for "Quota"
   8.  Security Considerations
   9.  Normative References
   Acknowledgements
   Author's Address

1.  Introduction

   The JSON Meta Application Protocol (JMAP) [RFC8620] is a generic
   protocol for synchronizing data, such as mails, calendars, or
   contacts between a client and a server.  It is optimized for mobile
   and web environments and aims to provide a consistent interface to
   different data types.

   This specification defines a data model for handling quotas over
   JMAP, allowing a user to obtain details about a certain quota.

   This specification does not address quota administration, which
   should be handled by other means.

1.1.  Notational Conventions

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in
   BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all
   capitals, as shown here.

   Type signatures, examples, and property descriptions in this document
   follow the conventions established in Section 1.1 of [RFC8620].  Data
   types defined in the core specification are also used in this
   document.

1.2.  Terminology

   This document reuses the terminology from the core JMAP specification
   established in Section 1.6 of [RFC8620].

   The term "Quota" (when capitalized) is used to refer to the data type
   defined in Section 4 and instance of that data type.

2.  Addition to the Capabilities Object

   The capabilities object is returned as part of the JMAP Session
   object; see [RFC8620], Section 2.

   This document defines one additional capability URI.

2.1.  urn:ietf:params:jmap:quota

   This represents support for the Quota data type and associated API
   methods.  Servers supporting this specification MUST add a property
   called "urn:ietf:params:jmap:quota" to the capabilities object.

   The value of this property is an empty object in both the JMAP
   Session capabilities property and an account's accountCapabilities
   property.

3.  Sub-types of the Quota Data Type

   There are two fields within the Quota data type, which have an
   enumerated set of possible values.  These are:

3.1.  Scope

   The Scope data type is used to represent the entities the quota
   applies to.  It is defined as a "String" with values from the
   following set:

   *  account: The quota information applies to just the client's
      account.

   *  domain: The quota information applies to all accounts sharing this
      domain.

   *  global: The quota information applies to all accounts belonging to
      the server.

3.2.  ResourceType

   The ResourceType data type is used to act as a unit of measure for
   the quota usage.  It is defined as a "String" with values from the
   following set:

   *  count: The quota is measured in a number of data type objects.
      For example, a quota can have a limit of 50 "Mail" objects.

   *  octets: The quota is measured in size (in octets).  For example, a
      quota can have a limit of 25000 octets.

4.  Quota

   The Quota is an object that displays the limit set to an account
   usage.  It then shows as well the current usage in regard to that
   limit.

4.1.  Properties of the Quota Object

   The Quota object MUST contain the following fields:

   *  id: Id

      The unique identifier for this object.

   *  resourceType: String

      The resource type of the quota as defined in Section 3.2.

   *  used: UnsignedInt

      The current usage of the defined quota, using the "resourceType"
      defined as unit of measure.  Computation of this value is handled
      by the server.

   *  hardLimit: UnsignedInt

      The hard limit set by this quota, using the "resourceType" defined
      as unit of measure.  Objects in scope may not be created or
      updated if this limit is reached.

   *  scope: String

      The "Scope" of this quota as defined in Section 3.1.

   *  name: String

      The name of the quota.  Useful for managing quotas and using
      queries for searching.

   *  types: String[]

      A list of all the type names as defined in the "JMAP Types Names"
      registry (e.g., Email, Calendar, etc.) to which this quota
      applies.  This allows the quotas to be assigned to distinct or
      shared data types.

      The server MUST filter out any types for which the client did not
      request the associated capability in the "using" section of the
      request.  Further, the server MUST NOT return Quota objects for
      which there are no types recognized by the client.

   The Quota object MAY contain the following fields:

   *  warnLimit: UnsignedInt|null

      The warn limit set by this quota, using the "resourceType" defined
      as unit of measure.  It can be used to send a warning to an entity
      about to reach the hard limit soon, but with no action taken yet.
      If set, it SHOULD be lower than the "softLimit" (if present and
      different from null) and the "hardLimit".

   *  softLimit: UnsignedInt|null

      The soft limit set by this quota, using the "resourceType" defined
      as unit of measure.  It can be used to still allow some operations
      but refuse some others.  What is allowed or not is up to the
      server.  For example, it could be used for blocking outgoing
      events of an entity (sending emails, creating calendar events,
      etc.) while still receiving incoming events (receiving emails,
      receiving calendars events, etc.).  If set, it SHOULD be higher
      than the "warnLimit" (if present and different from null) but
      lower than the "hardLimit".

   *  description: String|null

      Arbitrary, free, human-readable description of this quota.  It
      might be used to explain where the different limits come from and
      explain the entities and data types this quota applies to.  The
      description MUST be encoded in UTF-8 [RFC3629] as described in
      [RFC8620], Section 1.5, and selected based on an Accept-Language
      header in the request (as defined in [RFC9110], Section 12.5.4) or
      out-of-band information about the user's language or locale.

   The following JMAP methods are supported.

4.2.  Quota/get

   Standard "/get" method as described in [RFC8620], Section 5.1.  The
   _id_'s argument may be "null" to fetch all quotas of the account at
   once, as demonstrated in Section 5.1.

4.3.  Quota/changes

   Standard "/changes" method as described in [RFC8620], Section 5.2,
   but with one extra argument in the response:

   *  updatedProperties: String[]|null

      If only the "used" Quota property has changed since the old state,
      this will be a list containing only that property.  If the server
      is unable to tell if only "used" has changed, it MUST be null.

   Since "used" frequently changes, but other properties are generally
   only changed rarely, the server can help the client optimize data
   transfer by keeping track of changes to quota usage separate from
   other state changes.  The updatedProperties array may be used
   directly via a back-reference in a subsequent Quota/get call in the
   same request, so only these properties are returned if nothing else
   has changed.

   Servers MAY decide to add other properties to the list that they
   judge to be changing frequently.

   This method's usage is demonstrated in Section 5.2.

4.4.  Quota/query

   This is a standard "/query" method as described in [RFC8620],
   Section 5.5.

   A FilterCondition object has the following properties, any of which
   may be included or omitted:

   *  name: String

      The Quota _name_ property contains the given string.

   *  scope: String

      The Quota _scope_ property must match the given value exactly.

   *  resourceType: String

      The Quota _resourceType_ property must match the given value
      exactly.

   *  type: String

      The Quota _types_ property contains the given value.

   A Quota object matches the FilterCondition if, and only if, all the
   given conditions match.  If zero properties are specified, it is
   automatically true for all objects.

   The following Quota properties MUST be supported for sorting:

   *  name

   *  used

4.5.  Quota/queryChanges

   This is a standard "/queryChanges" method as described in [RFC8620],
   Section 5.6.

5.  Examples

5.1.  Fetching Quotas

   Request fetching all quotas related to an account:

   [[ "Quota/get", {
     "accountId": "u33084183",
     "ids": null
   }, "0" ]]

   With response:

   [[ "Quota/get", {
     "accountId": "u33084183",
     "state": "78540",
     "list": [{
       "id": "2a06df0d-9865-4e74-a92f-74dcc814270e",
       "resourceType": "count",
       "used": 1056,
       "warnLimit": 1600,
       "softLimit": 1800,
       "hardLimit": 2000,
       "scope": "account",
       "name": "bob@example.com",
       "description": "Personal account usage. When the soft limit is
                       reached, the user is not allowed to send mails or
                       create contacts and calendar events anymore.",
       "types" : [ "Mail", "Calendar", "Contact" ]
     }, {
       "id": "3b06df0e-3761-4s74-a92f-74dcc963501x",
       "resourceType": "octets",
       ...
     }, ...],
     "notFound": []
   }, "0" ]]

5.2.  Requesting Latest Quota Changes

   Request fetching the changes for a specific quota:

   [[ "Quota/changes", {
     "accountId": "u33084183",
     "sinceState": "78540",
     "maxChanges": 20
   }, "0" ],
   [ "Quota/get", {
     "accountId": "u33084183",
     "#ids": {
       "resultOf": "0",
       "name": "Quota/changes",
       "path": "/updated"
     },
     "#properties": {
       "resultOf": "0",
       "name": "Quota/changes",
       "path": "/updatedProperties"
     }
   }, "1" ]]

   With response:

   [[ "Quota/changes", {
     "accountId": "u33084183",
     "oldState": "78540",
     "newState": "78542",
     "hasMoreChanges": false,
     "updatedProperties": ["used"],
     "created": [],
     "updated": ["2a06df0d-9865-4e74-a92f-74dcc814270e"],
     "destroyed": []
   }, "0" ],
   [ "Quota/get", {
     "accountId": "u33084183",
     "state": "10826",
     "list": [{
       "id": "2a06df0d-9865-4e74-a92f-74dcc814270e",
       "used": 1246
     }],
     "notFound": []
   }, "1" ]]

6.  Push

   Servers MUST support the JMAP push mechanisms, as specified in
   [RFC8620], Section 7, to allow clients to receive notifications when
   the state changes for the Quota type defined in this specification.

7.  IANA Considerations

7.1.  JMAP Capability Registration for "quota"

   IANA has registered the "quota" JMAP Capability as follows:

   Capability Name:  urn:ietf:params:jmap:quota

   Reference:  RFC 9425

   Intended Use:  common

   Change Controller:  IETF

   Security and Privacy Considerations:  RFC 9425, Section 8

7.2.  JMAP Data Type Registration for "Quota"

   IANA has registered the "Quota" Data Type as follows:

   Type Name:  Quota

   Can Reference Blobs:  No

   Can Use for State Change:  Yes

   Capability:  urn:ietf:params:jmap:quota

   Reference:  RFC 9425

8.  Security Considerations

   All security considerations of JMAP [RFC8620] apply to this
   specification.

   Implementors should be careful to make sure the implementation of the
   extension specified in this document does not violate the site's
   security policy.  The resource usage of other users is likely to be
   considered confidential information and should not be divulged to
   unauthorized persons.

   As for any resource shared across users (for example, a quota with
   the "domain" or "global" scope), a user that can consume the resource
   can affect the resources available to the other users.  For example,
   a user could spam themselves with events and make the shared resource
   hit the limit and unusable for others (implementors could mitigate
   that with some rate-limiting implementation on the server).

   Also, revealing domain and global quota counts to all users may cause
   privacy leakage of other sensitive data, or at least the existence of
   other sensitive data.  For example, some users are part of a private
   list belonging to the server, so they shouldn't know how many users
   are in there.  However, by comparing the quota count before and after
   sending a message to the list, it could reveal the number of people
   of the list, as the domain or global quota count would go up by the
   number of people subscribed.  In order to limit those attacks, quotas
   with "domain" or "global" scope SHOULD only be visible to server
   administrators and not to general users.

9.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/info/rfc2119>.

   [RFC3629]  Yergeau, F., "UTF-8, a transformation format of ISO
              10646", STD 63, RFC 3629, DOI 10.17487/RFC3629, November
              2003, <https://www.rfc-editor.org/info/rfc3629>.

   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/info/rfc8174>.

   [RFC8620]  Jenkins, N. and C. Newman, "The JSON Meta Application
              Protocol (JMAP)", RFC 8620, DOI 10.17487/RFC8620, July
              2019, <https://www.rfc-editor.org/info/rfc8620>.

   [RFC9007]  Ouazana, R., Ed., "Handling Message Disposition
              Notification with the JSON Meta Application Protocol
              (JMAP)", RFC 9007, DOI 10.17487/RFC9007, March 2021,
              <https://www.rfc-editor.org/info/rfc9007>.

   [RFC9110]  Fielding, R., Ed., Nottingham, M., Ed., and J. Reschke,
              Ed., "HTTP Semantics", STD 97, RFC 9110,
              DOI 10.17487/RFC9110, June 2022,
              <https://www.rfc-editor.org/info/rfc9110>.

Acknowledgements

   Thank you to Michael Bailly, who co-wrote the first draft version of
   this document, before deciding to turn to other matters.

   Thank you to Benoit Tellier for his constant help and support on
   writing this document.

   Thank you to Raphael Ouazana for sharing his own experience on how to
   write an RFC after finalizing his own document: [RFC9007].

   Thank you to Bron Gondwana, Neil Jenkins, Alexey Melnikov, Joris
   Baum, and the people from the IETF JMAP working group in general, who
   helped with extensive discussions, reviews, and feedback.

   Thank you to the people in the IETF organization, who took the time
   to read, understand, comment, and give great feedback in the last
   rounds.

Author's Address

   René Cordier (editor)
   Linagora Vietnam
   5 Dien Bien Phu
   Hanoi
   10000
   Vietnam
   Email: rcordier@linagora.com
   URI:   https://linagora.vn