Support of the IEEE 1588 Timestamp Format in a Two-Way Active Measurement Protocol (TWAMP)
Draft of message to be sent after approval:
From: The IESG <firstname.lastname@example.org> To: IETF-Announce <email@example.com> Cc: The IESG <firstname.lastname@example.org>, email@example.com, firstname.lastname@example.org, email@example.com, Bill Cerveny <firstname.lastname@example.org>, email@example.com, firstname.lastname@example.org, email@example.com Subject: Protocol Action: 'Support of IEEE-1588 time stamp format in Two-Way Active Measurement Protocol (TWAMP)' to Proposed Standard (draft-ietf-ippm-twamp-time-format-06.txt) The IESG has approved the following document: - 'Support of IEEE-1588 time stamp format in Two-Way Active Measurement Protocol (TWAMP)' (draft-ietf-ippm-twamp-time-format-06.txt) as Proposed Standard This document is the product of the IP Performance Metrics Working Group. The IESG contact persons are Mirja Kühlewind and Spencer Dawkins. A URL of this Internet Draft is: https://datatracker.ietf.org/doc/draft-ietf-ippm-twamp-time-format/
Technical Summary This document describes an OPTIONAL feature for active performance measurement protocols allowing use of time stamp format defined in IEEE-1588v2-2008. Working Group Summary As indicated, this document describes an OPTIONAL feature allowing the use of the time stamp format defined in IEEE-1588v2-2008 for active measurement protocols and is uncontroversial. Document Quality During the document's life as an individual submission, the document received a small number of suggested changes, which were implemented. For adoption, there were four e-mails of support and no dissents. Post-adoption, the working group document was only revised once, to reflect an author change. ZTE already supports the PTP time stamp format in TWAMP Test packets. Broadcom DNX devices (88670, 88370, 88680, 88470) will support the standard data-plane requirements. Personnel The document shepherd is Bill Cerveny. The responsible area director is Spencer Dawkins.