Skip to main content

MIB for Fibre Channel's Fabric Shortest Path First (FSPF) Protocol
draft-ietf-imss-fc-fspf-mib-03

The information below is for an old version of the document that is already published as an RFC.
Document Type
This is an older version of an Internet-Draft that was ultimately published as RFC 4626.
Authors Claudio Desanti , Vinay Gaonkar , Keith McCloghrie, Silvano Gai
Last updated 2015-10-14 (Latest revision 2006-05-01)
Replaces draft-kzm-imss-fc-fspf-mib
RFC stream Internet Engineering Task Force (IETF)
Intended RFC status Proposed Standard
Formats
Reviews
Additional resources Mailing list discussion
Stream WG state (None)
Document shepherd (None)
IESG IESG state Became RFC 4626 (Proposed Standard)
Action Holders
(None)
Consensus boilerplate Unknown
Telechat date (None)
Responsible AD Dan Romascanu
Send notices to (None)
draft-ietf-imss-fc-fspf-mib-03
Internet Draft                                              C. DeSanti
                                                            V. Gaonkar
                                                         K. McCloghrie
                                                         Cisco Systems
                                                                S. Gai
                                                            1 May 2006

      MIB for Fibre-Channel's Fabric Shortest Path First Protocol
                   draft-ietf-imss-fc-fspf-mib-03.txt

Status of this Memo

   By submitting this Internet-Draft, each author represents that any
   applicable patent or other IPR claims of which he or she is aware
   have been or will be disclosed, and any of which he or she becomes
   aware will be disclosed, in accordance with Section 6 of BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as Internet-
   Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress".

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt.

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.

Abstract

   This memo defines a portion of the Management Information Base (MIB)
   for use with network management protocols in the Internet community.
   In particular, it describes managed objects for information related
   to the Fibre Channel network's Fabric Shortest Path First (FSPF)
   routing protocol.

Expires November 2006                                           [Page 1]



Internet Draft           Fibre-Channel FSPF MIB                 May 2006

Table of Contents

   1 Introduction .................................................    3
   2 The Internet-Standard Management Framework ...................    3
   3 Short Overview of Fibre Channel ..............................    3
   4 Relationship to Other MIBs ...................................    5
   5 MIB Overview .................................................    6
   5.1 Fibre Channel management instance ..........................    6
   5.2 Switch Index ...............................................    6
   5.3 Fabric Index ...............................................    6
   5.4 The MIB Groups .............................................    7
   5.4.1 The t11FspfGeneralGroup group ............................    7
   5.4.2 The t11FspfIfGroup group .................................    7
   5.4.3 The t11FspfDatabaseGroup group ...........................    7
   5.4.4 The t11FspfNotificationGroup group .......................    7
   6 The T11-FC-FSPF-MIB Module ...................................    8
   7 Intellectual Property ........................................   34
   8 Acknowledgements .............................................   34
   9 Normative References .........................................   35
   10 Informative References ......................................   36
   11 IANA Considerations .........................................   36
   12 Security Considerations .....................................   36
   13 Authors' Addresses ..........................................   38

Expires November 2006                                           [Page 2]



Internet Draft           Fibre-Channel FSPF MIB                 May 2006

1.  Introduction

   This memo defines a portion of the Management Information Base (MIB)
   for use with network management protocols in the Internet community.
   In particular, it describes managed objects for information related
   to the Fibre Channel network's Fabric Shortest Path First (FSPF)
   routing protocol, which is specified in [FC-SW-4].

2.  The Internet-Standard Management Framework

   For a detailed overview of the documents that describe the current
   Internet-Standard Management Framework, please refer to section 7 of
   RFC 3410 [RFC3410].

   Managed objects are accessed via a virtual information store, termed
   the Management Information Base or MIB.  MIB objects are generally
   accessed through the Simple Network Management Protocol (SNMP).
   Objects in the MIB are defined using the mechanisms defined in the
   Structure of Management Information (SMI).  This memo specifies a MIB
   module that is compliant to the SMIv2, which is described in STD 58,
   RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580
   [RFC2580].

3.  Short Overview of Fibre Channel

   The Fibre Channel (FC) is logically a bidirectional point-to-point
   serial data channel, structured for high performance.  Fibre Channel
   provides a general transport vehicle for higher level protocols such
   as Small Computer System Interface (SCSI) command sets, the High-
   Performance Parallel Interface (HIPPI) data framing, IP (Internet
   Protocol), IEEE 802.2, and others.

   Physically, Fibre Channel is an interconnection of multiple
   communication points, called N_Ports, interconnected either by a
   switching network, called a Fabric, or by a point-to-point link.  A
   Fibre Channel "node" consists of one or more N_Ports.  A Fabric may
   consist of multiple Interconnect Elements, some of which are
   switches.  An N_Port connects to the Fabric via a port on a switch
   called an F_Port.  When multiple FC nodes are connected to a single
   port on a switch via an "Arbitrated Loop" topology, the switch port
   is called an FL_Port, and the nodes' ports are called NL_Ports.  The
   term Nx_Port is used to refer to either an N_Port or an NL_Port.  The
   term Fx_Port is used to refer to either an F_Port or an FL_Port.  A

Expires November 2006                                           [Page 3]



Internet Draft           Fibre-Channel FSPF MIB                 May 2006

   switch port, which is interconnected to another switch port via an
   Inter-Switch Link (ISL), is called an E_Port.  A B_Port connects a
   bridge device with an E_Port on a switch; a B_Port provides a subset
   of E_Port functionality.

   Many Fibre Channel components, including the fabric, each node, and
   most ports, have globally-unique names.  These globally-unique names
   are typically formatted as World Wide Names (WWNs).  More information
   on WWNs can be found in [FC-FS].  WWNs are expected to be persistent
   across agent and unit resets.

   Fibre Channel frames contain 24-bit address identifiers which
   identify the frame's source and destination ports.  Each FC port has
   both an address identifier and a WWN.  When a fabric is in use, the
   FC address identifiers are dynamic and are assigned by a switch.
   Each octet of a 24-bit address represents a level in an address
   hierarchy, with a Domain_ID being the highest level of the hierarchy.

   The routing of frames within the Fabric is normally based on a
   routing protocol called Fabric Shortest Path First (FSPF).  FSPF is a
   link state path selection protocol, which is defined in section 8 of
   [FC-SW-4].  FSPF keeps track of the state of the links on all
   switches in the Fabric and associates a cost with each link.  The
   protocol computes paths from a switch to all the other switches in
   the Fabric by adding the cost of all the links traversed by the path,
   and choosing the path that minimizes the cost. The collection of link
   states (including cost) of all the switches in a Fabric constitutes
   the topology database (or link-state database).

   FSPF has four major components:

      a) A Hello protocol, used to establish connectivity with a
      neighbor switch, to establish the identity of the neighbor switch,
      and to exchange FSPF parameters and capabilities;

      b) A replicated topology database, with the protocols and
      mechanisms to keep the databases synchronized across the Fabric;

      c) A path computation algorithm (e.g., Dijkstra's algorithm);

      d) A routing table update.

   The topology database synchronization in turn consists of two major
   components: an initial database synchronization, and an update
   mechanism. The initial database synchronization is used when a switch

Expires November 2006                                           [Page 4]



Internet Draft           Fibre-Channel FSPF MIB                 May 2006

   is initialized, or when an Inter-Switch Link (ISL) comes up. The
   update mechanism is used in two circumstances:

      a) When there is a link state change, for example an ISL going
      down or coming up;

      b) On a periodic basis, to prevent switches from deleting topology
      information from the database.

   Also note that all connections between Fibre Channel switches are
   point-to-point.

   The latest standard for an interconnecting Fabric containing multiple
   Fabric Switch elements is [FC-SW-4].  [FC-SW-4] carries forward the
   previous version's specification for the operation of a single Fabric
   in a physical infrastructure, augmenting it with the definition of
   Virtual Fabrics and with the specification of how multiple Virtual
   Fabrics can operate within one (or more) physical infrastructures.
   The use of Virtual Fabrics provides for each frame to be tagged in
   its header to indicate which one of several Virtual Fabrics that
   frame is being transmitted on.  All frames entering a particular
   "Core Switch" [FC-SW-4] (i.e., a physical switch) on the same Virtual
   Fabric are processed by the same "Virtual Switch" within that Core
   switch.

4.  Relationship to Other MIBs

   The first standardized MIB module for Fibre Channel [RFC2837] was
   focussed on Fibre Channel switches.  It is being replaced by the more
   generic Fibre Channel Management MIB [FC-MGMT] which defines basic
   information for Fibre Channel hosts and switches, including
   extensions to the standard IF-MIB [RFC2863] for Fibre Channel
   interfaces.

   This MIB module extends beyond [FC-MGMT] to cover the operation of
   the FSPF routing protocol in Fibre Channel switches.

   This MIB module only contains information specific to FSPF.
   Information which would still be applicable if any other routing
   protocol were to be used, is specified in a separate MIB module [FC-
   RTM-MIB].

   This MIB module imports some common Textual Conventions from T11-TC-
   MIB, defined in [FC-FAM-MIB].

Expires November 2006                                           [Page 5]



Internet Draft           Fibre-Channel FSPF MIB                 May 2006

5.  MIB Overview

   This MIB module provides the means for monitoring the operation of,
   and configuring some parameters of, one or more instances of the FSPF
   protocol.

5.1.  Fibre Channel management instance

   A Fibre Channel management instance is defined in [FC-MGMT] as a
   separable managed instance of Fibre Channel functionality.  Fibre
   Channel functionality may be grouped into Fibre Channel management
   instances in whatever way is most convenient for the
   implementation(s).  For example, one such grouping accommodates a
   single SNMP agent having multiple AgentX [RFC2741] sub-agents, with
   each sub-agent implementing a different Fibre Channel management
   instance.

   The object, fcmInstanceIndex, is IMPORTed from the FC-MGMT-MIB
   [FC-MGMT] as the index value to uniquely identify each Fibre Channel
   management instance within the same SNMP context ([RFC3411] section
   3.3.1).

5.2.  Switch Index

   The FC-MGMT-MIB [FC-MGMT] defines the fcmSwitchTable as a table of
   information about Fibre Channel switches which are managed by Fibre
   Channel management instances.  Each Fibre Channel management instance
   can manage one or more Fibre Channel switches.  The Switch Index,
   fcmSwitchIndex, is IMPORTed from the FC-MGMT-MIB as the index value
   to uniquely identify a Fibre Channel switch amongst those (one or
   more) managed by the same Fibre Channel management instance.

5.3.  Fabric Index

   Whether operating on a physical Fabric (i.e., without Virtual
   Fabrics) or within a Virtual Fabric, the operation of FSPF within a
   Fabric is identical.  Therefore, this MIB module defines all Fabric-
   related information in tables which are INDEX-ed by an arbitrary
   integer, named a "Fabric Index", the syntax of which is IMPORTed from
   the T11-TC-MIB.  When a device is connected to a single physical
   Fabric, without use of any virtual Fabrics, the value of this Fabric
   Index will always be 1.  In an environment of multiple virtual and/or
   physical Fabrics, this index provides a means to distinguish one
   Fabric from another.

Expires November 2006                                           [Page 6]



Internet Draft           Fibre-Channel FSPF MIB                 May 2006

   It is quite possible, and may even be likely, that a Fibre Channel
   switch will have ports connected to multiple virtual and/or physical
   Fabrics.  Thus, in order to simplify a management protocol query
   concerning all the Fabrics to which a single switch is connected,
   fcmSwitchIndex will be listed before t11FspfFabricIndex when they
   both appear in the same INDEX clause.

5.4.  The MIB Groups

   This section describes the four MIB groups contained in the MIB
   module.

5.4.1.  The t11FspfGeneralGroup group

   This group provides for per-Fabric monitoring of the FSPF state and
   per-Fabric monitoring/configuration of FSPF parameters.

5.4.2.  The t11FspfIfGroup group

   This group provides for per-interface monitoring of FSPF
   state/statistics and per-interface monitoring/configuration of FSPF
   parameters.

5.4.3.  The t11FspfDatabaseGroup group

   This group permits the monitoring of the information present in the
   FSPF topology database.

5.4.4.  The t11FspfNotificationGroup group

   This group contains the notifications which are generated on
   asynchronous events related to the operation of FSPF.

Expires November 2006                                           [Page 7]



Internet Draft           Fibre-Channel FSPF MIB                 May 2006

6.  The T11-FC-FSPF-MIB Module

T11-FC-FSPF-MIB DEFINITIONS ::= BEGIN
--
-- For management of FSPF, the Fibre Channel routing protocol.
--

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
    Counter32, Integer32, Unsigned32, TimeTicks,
    Gauge32, mib-2                     FROM SNMPv2-SMI   -- [RFC2578]
    MODULE-COMPLIANCE, OBJECT-GROUP,
    NOTIFICATION-GROUP                 FROM SNMPv2-CONF  -- [RFC2580]
    TEXTUAL-CONVENTION, RowStatus, StorageType,
    TruthValue                         FROM SNMPv2-TC    -- [RFC2579]
    ifIndex, InterfaceIndex            FROM IF-MIB       -- [RFC2863]
    fcmInstanceIndex, fcmSwitchIndex,
    FcDomainIdOrZero                   FROM FC-MGMT-MIB  -- [FC-MGMT]
    T11FabricIndex                     FROM T11-TC-MIB   -- [FC-FAM-MIB]
    t11FamConfigDomainId
                       FROM T11-FC-FABRIC-ADDR-MGR-MIB;  -- [FC-FAM-MIB]

t11FcFspfMIB MODULE-IDENTITY
    LAST-UPDATED "200603130000Z"
    ORGANIZATION "T11"
    CONTACT-INFO
                   "Claudio DeSanti
                    Cisco Systems, Inc.
                    170 West Tasman Drive
                    San Jose, CA 95134 USA
                    EMail: cds@cisco.com

                    Keith McCloghrie
                    Cisco Systems, Inc.
                    170 West Tasman Drive
                    San Jose, CA USA 95134
                    Email: kzm@cisco.com"
    DESCRIPTION
           "The MIB module for managing the Fabric Shortest Path
           First (FSPF) protocol.  FSPF is specified in FC-SW-4.

           Copyright (C) The Internet Society (2006).  This version of
           this MIB module is part of RFC yyyy;  see the RFC itself for
           full legal notices."

Expires November 2006                                           [Page 8]



Internet Draft           Fibre-Channel FSPF MIB                 May 2006

-- RFC Editor: replace yyyy with actual RFC number & remove this note
    REVISION    "200603130000Z"
    DESCRIPTION
           "Initial version of this MIB module, published as RFCyyyy."
-- RFC-Editor, replace yyyy with actual RFC number & remove this note
    ::= { mib-2 XXX }  -- to be assigned by IANA
-- RFC Editor: replace XXX with IANA-assigned number & remove this note

t11FspfNotifications      OBJECT IDENTIFIER ::= { t11FcFspfMIB 0 }
t11FspfObjects            OBJECT IDENTIFIER ::= { t11FcFspfMIB 1 }
t11FspfConformance        OBJECT IDENTIFIER ::= { t11FcFspfMIB 2 }
t11FspfConfiguration      OBJECT IDENTIFIER ::= { t11FspfObjects 1 }
t11FspfDatabase           OBJECT IDENTIFIER ::= { t11FspfObjects 2 }

--
-- TEXTUAL CONVENTIONS

T11FspfLsrType ::= TEXTUAL-CONVENTION
    STATUS    current
    DESCRIPTION
           "Type of the Link State Record.

           FC-SW-4 defines two types of LSRs, and allows for the
           possibility of more being defined in the future:

               01      - Switch Link Record
               02      - Obsolete
               240-255 - Vendor Specific
               others  - Reserved.
           "
    REFERENCE
           "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
            ANSI INCITS 418-2006, section 6.1.9.3."
    SYNTAX    Integer32 (0..255)

T11FspfLinkType ::= TEXTUAL-CONVENTION
    STATUS    current
    DESCRIPTION
           "Type of an the FSPF Link. Presently defined values:

               1           - Point-to-Point
               240-255     - Vendor Specific
               all others  - Reserved.
           "

Expires November 2006                                           [Page 9]



Internet Draft           Fibre-Channel FSPF MIB                 May 2006

    REFERENCE
           "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
           ANSI INCITS 418-2006, section 6.1.9.4."
    SYNTAX    Integer32 (0..255)

T11FspfInterfaceState ::= TEXTUAL-CONVENTION
    STATUS    current
    DESCRIPTION
           "The state of the FSPF Neighbor Finite State Machine
           for the neighbor (switch) on a particular interface.
           Possible values are :

                down(1)         - Down
                init(2)         - Init
                dbExchange(3)   - Database Exchange
                dbAckwait(4)    - Database AckWait
                dbWait(5)       - Database Wait
                full(6)         - Full (Connected)
           "
    REFERENCE
           "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
           ANSI INCITS 418-2006, section 8.7."
    SYNTAX  INTEGER {
                   down(1),
                   init(2),
                   dbExchange(3),
                   dbAckwait(4),
                   dbWait(5),
                   full(6)
            }

T11FspfLastCreationTime ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
           "This TC describes an object that stores the last time
           it, and the row containing it, was created.

           This can be used by management applications to determine
           that a row has been deleted and re-created between reads,
           causing an otherwise undetectable discontinuity in the
           data."
    SYNTAX  TimeTicks

Expires November 2006                                          [Page 10]



Internet Draft           Fibre-Channel FSPF MIB                 May 2006

--
-- t11FspfTable

t11FspfTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF T11FspfEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
           "This table allows the users to configure and monitor FSPF's
           per-Fabric parameters and statistics on all Fabrics known to
           locally-managed switches.

           Entries are created/removed by the agent if and when
           (Virtual) Fabrics are created/deleted."
    ::= { t11FspfConfiguration 1 }

t11FspfEntry OBJECT-TYPE
    SYNTAX      T11FspfEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
           "An entry containing FSPF variables, parameters and
           statistics on a particular switch (identified by values
           of fcmInstanceIndex and fcmSwitchIndex) for a particular
           Fabric (identified by a t11FspfFabricIndex value).

           (Note that the local switch's per-fabric Domain-ID is
           available in t11FamConfigDomainId which is defined in
           T11-FC-FABRIC-ADDR-MGR-MIB.)"
    INDEX      { fcmInstanceIndex, fcmSwitchIndex, t11FspfFabricIndex }
    ::= { t11FspfTable 1 }

T11FspfEntry ::= SEQUENCE  {
    t11FspfFabricIndex                 T11FabricIndex,
    t11FspfMinLsArrival                Unsigned32,
    t11FspfMinLsInterval               Unsigned32,
    t11FspfLsRefreshTime               Unsigned32,
    t11FspfMaxAge                      Unsigned32,
    t11FspfMaxAgeDiscards              Counter32,
    t11FspfPathComputations            Counter32,
    t11FspfChecksumErrors              Counter32,
    t11FspfLsrs                        Gauge32,
    t11FspfCreateTime                  T11FspfLastCreationTime,
    t11FspfAdminStatus                 INTEGER,
    t11FspfOperStatus                  INTEGER,

Expires November 2006                                          [Page 11]



Internet Draft           Fibre-Channel FSPF MIB                 May 2006

    t11FspfNbrStateChangNotifyEnable   TruthValue,
    t11FspfSetToDefault                INTEGER,
    t11FspfStorageType                 StorageType
}

t11FspfFabricIndex OBJECT-TYPE
    SYNTAX      T11FabricIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
           "A unique index value which uniquely identifies a
           particular Fabric.

           In a Fabric conformant to FC-SW-4, multiple Virtual Fabrics
           can operate within one (or more) physical infrastructures.
           In such a case, index value is used to uniquely identify a
           particular Fabric within a physical infrastructure.

           In a Fabric which has (can have) only a single Fabric
           operating within the physical infrastructure, the
           value of this Fabric Index will always be 1."
    ::= { t11FspfEntry 1 }

t11FspfMinLsArrival OBJECT-TYPE
    SYNTAX      Unsigned32 (0..65535)
    UNITS       "milliSeconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
           "The minimum time after accepting a Link State Record
           (LSR) on this Fabric before accepting another update of
           the same LSR on the same Fabric.

           An LSR update that is not accepted because of this time
           interval is discarded."
    REFERENCE  "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
               ANSI INCITS 418-2006, sections 8.6.4.5 & 15.1."
    DEFVAL     {1000}
    ::= { t11FspfEntry 2 }

t11FspfMinLsInterval OBJECT-TYPE
    SYNTAX      Unsigned32 (0..65535)
    UNITS       "milliSeconds"
    MAX-ACCESS  read-write
    STATUS      current

Expires November 2006                                          [Page 12]



Internet Draft           Fibre-Channel FSPF MIB                 May 2006

    DESCRIPTION
           "The minimum time after this switch sends an LSR on this
           Fabric before it will send another update of the same LSR
           on the same Fabric."
    REFERENCE  "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
               ANSI INCITS 418-2006, section 15.1."
    DEFVAL     {5000}
    ::= { t11FspfEntry 3 }

t11FspfLsRefreshTime OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "Minutes"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
           "The interval between transmission of refresh LSRs on this
           Fabric."
    REFERENCE  "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
               ANSI INCITS 418-2006, sections 8.5.1 & 15.1."
    DEFVAL     {30}
    ::= { t11FspfEntry 4 }

t11FspfMaxAge OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "Minutes"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
           "The maximum age an LSR will be retained in the FSPF
           database on this Fabric.  An LSR is removed from the
           database after MaxAge is reached."
    REFERENCE  "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
               ANSI INCITS 418-2006, section 15.1."
    DEFVAL     {60}
    ::= { t11FspfEntry 5 }

t11FspfMaxAgeDiscards OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
           "The number of LSRs discarded due to their age reaching
           t11FspfMaxAge in this Fabric.  The last discontinuity of
           this counter is indicated by t11FspfCreateTime."
    ::= { t11FspfEntry 6 }

Expires November 2006                                          [Page 13]



Internet Draft           Fibre-Channel FSPF MIB                 May 2006

t11FspfPathComputations OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
           "The number of times that the path computation algorithm
           has been invoked by this Switch on this Fabric to compute
           a set of minimum cost paths for this Fabric.  The last
           discontinuity of this counter is indicated by
           t11FspfCreateTime."
    REFERENCE  "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
               ANSI INCITS 418-2006, section 8.1.1."
    ::= { t11FspfEntry 7 }

t11FspfChecksumErrors OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
           "The number of FSPF checksum errors which were detected
           locally (and therefore discarded) on this Fabric.
           The last discontinuity of this counter is indicated by
           t11FspfCreateTime."
    REFERENCE  "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
               ANSI INCITS 418-2006, section 8.5.4."
    ::= { t11FspfEntry 8 }

t11FspfLsrs OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
           "The current number of entries for this Fabric in the
           t11FspfLsrTable."
    ::= { t11FspfEntry 9 }

t11FspfCreateTime OBJECT-TYPE
    SYNTAX      T11FspfLastCreationTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
           "The value of sysUpTime when this entry was last created."
    ::= { t11FspfEntry 10 }

t11FspfAdminStatus OBJECT-TYPE

Expires November 2006                                          [Page 14]



Internet Draft           Fibre-Channel FSPF MIB                 May 2006

    SYNTAX      INTEGER {
                    up(1),
                    down(2)
                    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
           "The desired state of FSPF in this Fabric.  If value of
           this object is set to 'up', then FSPF is enabled in
           this Fabric.  If set to 'down', then FSPF is disabled
           in this Fabric -- when FSPF is disabled, FSPF provides
           no routes to be included in the T11-FC-ROUTE-MIB module.
           (see the T11-FC-ROUTE-MIB)."
    REFERENCE  "T11-FC-ROUTE-MIB, The Fibre-Channel Routing
                Information MIB, RFCzzzz."
-- RFC Editor: pls replace zzzz with the RFC number & remove this note
    DEFVAL {up}
    ::= { t11FspfEntry 11 }

t11FspfOperStatus OBJECT-TYPE
    SYNTAX      INTEGER {
                      up(1),
                      down(2)
                     }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
           "State of FSPF in this Fabric. If 't11FspfAdminStatus' is
           'down' then the 't11FspfOperStatus' should be 'down'.
           If 't11FspfAdminStatus' is changed to 'up' then
           't11FspfOperStatus' should change to 'up' as and when
           FSPF is active in this Fabric."
    ::= { t11FspfEntry 12 }

t11FspfNbrStateChangNotifyEnable OBJECT-TYPE
    SYNTAX     TruthValue
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
           "Specifies whether or not the local agent should
           issue the notification 't11FspfNbrStateChangNotify'
           when the local switch learns of a change of state
           in the FSPF Neighbor Finite State Machine on an
           interface in this Fabric.

Expires November 2006                                          [Page 15]



Internet Draft           Fibre-Channel FSPF MIB                 May 2006

           If the value of the object is 'true, then the
           notification is generated. If the value is 'false',
           notification is not generated."
    DEFVAL { false }
    ::= { t11FspfEntry 13 }

t11FspfSetToDefault OBJECT-TYPE
    SYNTAX      INTEGER {
                     default(1),
                     noOp(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
           "Setting this value to 'default' changes the value of each
           and every write-able object in this row to its default
           value.

           No action is taken if this object is set to 'noOp'.
           The value of the object when read is always 'noOp'."
    ::= { t11FspfEntry 14 }

t11FspfStorageType OBJECT-TYPE
    SYNTAX      StorageType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
           "The storage type for read-write objects in this
           conceptual row.

           Conceptual rows having the value 'permanent' need not
           allow write-access to any columnar objects in the row."
    DEFVAL { nonVolatile }
    ::= { t11FspfEntry 15 }

--
-- t11FspfIfTable

t11FspfIfTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF T11FspfIfEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
           "This table allows the users to configure and monitor
           the FSPF parameters which are per-interface (identified

Expires November 2006                                          [Page 16]



Internet Draft           Fibre-Channel FSPF MIB                 May 2006

           by a t11FspfIfIndex value), per-Fabric (identified by a
           t11FspfFabricIndex value), and per-switch (identified by
           values of fcmInstanceIndex and fcmSwitchIndex).

           Creating a row in this table via t11FspfIfRowStatus
           provides the means to specify non-default parameter value(s)
           for an interface at a time when the relevant row in this
           table would not otherwise exist because the interface is
           either down or it is not an E_Port, but the corresponding
           row in the t11FspfTable must already exist.

           After the non-default values have been specified for a
           port's parameters, they need to be retained in this table
           even when the port becomes 'isolated'.  However, having
           unnecessary rows in this table clutters it up, and makes
           those rows that are useful harder for an NMS to find.
           Therefore, when an E_Port becomes isolated, its row get
           deleted if and only if all of its parameter values are the
           default values; also, when an E_Port becomes non-isolated
           in a particular Fabric, a row in this table needs to exist
           and is automatically created if necessary.

           The specific conditions for an automated/implicit deletion
           of a row are:
           a) if the corresponding interface is no longer an E_Port
              (e.g., a G_Port which is dynamically determined to be an
              F_Port), and all configurable parameters have default
              values; or
           b) if the interface identified by t11FspfIfIndex no longer
              exists (e.g., because a line-card is physically removed);
              or
           c) if the corresponding row in the t11FspfTable is deleted.
           "
    ::= { t11FspfConfiguration 2 }

t11FspfIfEntry OBJECT-TYPE
    SYNTAX      T11FspfIfEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
           "An entry containing FSPF information for the interface
           identified by t11FspfIfIndex, on the fabric identified
           by t11FspfFabricIndex, on the switch identified by
           fcmSwitchIndex."
    INDEX       { fcmInstanceIndex, fcmSwitchIndex,

Expires November 2006                                          [Page 17]



Internet Draft           Fibre-Channel FSPF MIB                 May 2006

                  t11FspfFabricIndex, t11FspfIfIndex }
    ::= { t11FspfIfTable 1 }

T11FspfIfEntry ::= SEQUENCE {
    t11FspfIfIndex                     InterfaceIndex,
    t11FspfIfHelloInterval             Unsigned32,
    t11FspfIfDeadInterval              Unsigned32,
    t11FspfIfRetransmitInterval        Unsigned32,
    t11FspfIfInLsuPkts                 Counter32,
    t11FspfIfInLsaPkts                 Counter32,
    t11FspfIfOutLsuPkts                Counter32,
    t11FspfIfOutLsaPkts                Counter32,
    t11FspfIfOutHelloPkts              Counter32,
    t11FspfIfInHelloPkts               Counter32,
    t11FspfIfRetransmittedLsuPkts      Counter32,
    t11FspfIfInErrorPkts               Counter32,
    t11FspfIfNbrState                  T11FspfInterfaceState,
    t11FspfIfNbrDomainId               FcDomainIdOrZero,
    t11FspfIfNbrPortIndex              Unsigned32,
    t11FspfIfAdminStatus               INTEGER,
    t11FspfIfCreateTime                T11FspfLastCreationTime,
    t11FspfIfSetToDefault              INTEGER,
    t11FspfIfLinkCostFactor            Unsigned32,
    t11FspfIfStorageType               StorageType,
    t11FspfIfRowStatus                 RowStatus
}

t11FspfIfIndex OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
           "The value of ifIndex which identifies the local
           Fibre Channel interface for which this entry
           contains FSPF information."
    ::= { t11FspfIfEntry 1 }

t11FspfIfHelloInterval OBJECT-TYPE
    SYNTAX      Unsigned32 (1..65535)
    UNITS       "Seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
           "Interval between the periodic HELLO messages sent on this
           interface in this Fabric to verify the link health. Note

Expires November 2006                                          [Page 18]



Internet Draft           Fibre-Channel FSPF MIB                 May 2006

           that this value must be same at both ends of a link in
           this Fabric."
    DEFVAL {20}
    ::= { t11FspfIfEntry 2 }

t11FspfIfDeadInterval OBJECT-TYPE
    SYNTAX      Unsigned32 (2..65535)
    UNITS       "Seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
           "Maximum time for which no HELLO messages can be received
           on this interface in this Fabric. After this time, the
           interface is assumed to be broken and removed from the
           database. Note that this value must be greater than the
           HELLO interval specified on this interface in this Fabric."
    DEFVAL {80}
    ::= { t11FspfIfEntry 3 }

t11FspfIfRetransmitInterval OBJECT-TYPE
    SYNTAX      Unsigned32 (1..65535)
    UNITS       "Seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
           "The time after which an unacknowledged LSR is
           retransmitted on this interface in this Fabric."
    DEFVAL {5}
    ::= { t11FspfIfEntry 4 }

t11FspfIfInLsuPkts OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
           "Number of Link State Update (LSU) packets received on
           this interface in this Fabric.  The last discontinuity
           of this counter is indicated by t11FspfIfCreateTime."
    ::= { t11FspfIfEntry 5 }

t11FspfIfInLsaPkts OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION

Expires November 2006                                          [Page 19]



Internet Draft           Fibre-Channel FSPF MIB                 May 2006

           "Number of Link State Acknowledgement (LSA) packets
           received on this interface in this Fabric.  The last
           discontinuity of this counter is indicated by
           t11FspfIfCreateTime."
    ::= { t11FspfIfEntry 6 }

t11FspfIfOutLsuPkts OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
           "Number of Link State Update (LSU) packets transmitted
           on this interface in this Fabric.  The last
           discontinuity of this counter is indicated by
           t11FspfIfCreateTime."
    ::= { t11FspfIfEntry 7 }

t11FspfIfOutLsaPkts OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
           "Number of Link State Acknowledgement (LSA) packets
           transmitted on this interface in this Fabric.  The
           last discontinuity of this counter is indicated by
           t11FspfIfCreateTime."
    ::= { t11FspfIfEntry 8 }

t11FspfIfOutHelloPkts OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
           "Number of HELLO packets transmitted on this interface in
           this Fabric.  The last discontinuity of this counter is
           indicated by t11FspfIfCreateTime."
    ::= { t11FspfIfEntry 9 }

t11FspfIfInHelloPkts OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
           "Number of HELLO packets received on this interface in
           this Fabric.  The last discontinuity of this counter is

Expires November 2006                                          [Page 20]



Internet Draft           Fibre-Channel FSPF MIB                 May 2006

           indicated by t11FspfIfCreateTime."
    ::= { t11FspfIfEntry 10 }

t11FspfIfRetransmittedLsuPkts OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
           "The number of LSU packets which contained one or more
           retransmitted LSRs, and which were transmitted on this
           interface in this Fabric.  The last discontinuity of
           this counter is indicated by t11FspfIfCreateTime."
    ::= { t11FspfIfEntry 11 }

t11FspfIfInErrorPkts OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
           "Number of invalid FSPF control packets received on this
           interface in this Fabric.  The last discontinuity of
           this counter is indicated by t11FspfIfCreateTime."
    ::= { t11FspfIfEntry 12 }

t11FspfIfNbrState OBJECT-TYPE
    SYNTAX      T11FspfInterfaceState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
           "The state of FSPF's 'neighbor state machine', which is
           the operational state of the interaction with the
           neighbor's interface which is connected to this interface.

           If the 't11FspfIfAdminStatus' is 'down', then this object
           should be 'down'. If the 't11FspfIfAdminStatus' is 'up'
           then this object's value depends on the state of FSPF's
           'neighbor state machine' on this interface in this
           Fabric."
    REFERENCE  "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
               ANSI INCITS 418-2006, section 8.7"
    ::= { t11FspfIfEntry 13 }

t11FspfIfNbrDomainId OBJECT-TYPE
    SYNTAX      FcDomainIdOrZero
    MAX-ACCESS  read-only

Expires November 2006                                          [Page 21]



Internet Draft           Fibre-Channel FSPF MIB                 May 2006

    STATUS      current
    DESCRIPTION
           "The Domain Id of the neighbor in this Fabric."
    ::= { t11FspfIfEntry 14 }

t11FspfIfNbrPortIndex OBJECT-TYPE
    SYNTAX      Unsigned32 (0..16777215)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
           "The index, as known by the neighbor, of the neighbor's
           interface which is connected to this interface in this
           Fabric."
    REFERENCE  "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
               ANSI INCITS 418-2006, section 6.1.9.4."
    ::= { t11FspfIfEntry 15 }

t11FspfIfAdminStatus OBJECT-TYPE
    SYNTAX      INTEGER {
                up(1),
                down(2)
                }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
           "The desired state of FSPF on this interface in this
           Fabric, whenever 't11FspfAdminStatus' is 'up'.
           If value of this object is set to 'up', then FSPF is
           enabled on this interface in this Fabric. If set to
           'down', then FSPF is disabled on this interface in this
           Fabric.  Note that the operational state of FSPF on an
           interface is given by t11FspfIfNbrState."
    DEFVAL  {up}
    ::= { t11FspfIfEntry 16 }

t11FspfIfCreateTime OBJECT-TYPE
    SYNTAX      T11FspfLastCreationTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
           "The value of sysUpTime when this entry was last
           created."
    ::= { t11FspfIfEntry 17 }

t11FspfIfSetToDefault OBJECT-TYPE

Expires November 2006                                          [Page 22]



Internet Draft           Fibre-Channel FSPF MIB                 May 2006

    SYNTAX      INTEGER {
                     default(1),
                     noOp(2)
                }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
           "Setting this value to 'default' changes the value of each
           and every write-able object in this row to its default
           value.

           If all the configuration parameters have their default
           values and if the interface is down, then the row is
           deleted automatically.

           No action is taken if this object is set to 'noOp'.
           The value of the object when read is always 'noOp'."
    ::= { t11FspfIfEntry 18 }

t11FspfIfLinkCostFactor OBJECT-TYPE
    SYNTAX      Unsigned32 (1..65535)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
           "The administrative factor used in calculating the cost
           of sending a frame on this interface in this Fabric.

           The formula is used to calculate the link cost is:

                    Link Cost = S * (1.0625e12 / ifSpeed)
           where:
             S = (the value of this object / 100)
             ifSpeed = interface speed (as defined in the IF-MIB).
           "
    REFERENCE
           "Fibre Channel - Switch Fabric - 4 (FC-SW-4),
            ANSI INCITS 418-2006, section 8.5.5; and
            IF-MIB, RFC 2863."
    DEFVAL { 100 }
    ::= { t11FspfIfEntry 19 }

t11FspfIfStorageType OBJECT-TYPE
    SYNTAX      StorageType
    MAX-ACCESS  read-create
    STATUS      current

Expires November 2006                                          [Page 23]



Internet Draft           Fibre-Channel FSPF MIB                 May 2006

    DESCRIPTION
           "The storage type for this conceptual row.
            Conceptual rows having the value 'permanent' need not
            allow write-access to any columnar objects in the row."
       DEFVAL { nonVolatile }
    ::= { t11FspfIfEntry 20 }

t11FspfIfRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
           "The status of the conceptual row.

           This object can be used to create an entry only if there
           is an entry in the t11FspfTable for the corresponding
           Fabric, and the interface is either isolated or is a
           non-E_port.

           Setting this object to 'destroy' will typically fail;
           to reverse the creation process, set the corresponding
           instance of t11FspfIfSetToDefault to 'default'."
    ::= { t11FspfIfEntry 21 }

--
-- t11FspfLsrTable

t11FspfLsrTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF T11FspfLsrEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
           "This table is the database of all of the latest
           incarnations of the Link State Records (LSRs) which
           are currently contained in the topology database,
           for all interfaces on all Fabrics known to
           locally-managed switches.

           A Fabric's topology database contains the LSRs which
           have been either issued or received by a local switch on
           that Fabric, and which have not reached t11FspfMaxAge."
    ::= { t11FspfDatabase 1 }

t11FspfLsrEntry OBJECT-TYPE
    SYNTAX      T11FspfLsrEntry

Expires November 2006                                          [Page 24]



Internet Draft           Fibre-Channel FSPF MIB                 May 2006

    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
           "This gives information for the most recent update of an
           LSR.  There is one entry for every LSR issued or received
           by a locally-managed switch (identified by
           fcmInstanceIndex and fcmSwitchIndex) in a Fabric
           (identified by t11FspfFabricIndex)."
    INDEX      { fcmInstanceIndex, fcmSwitchIndex, t11FspfFabricIndex,
                 t11FspfLsrDomainId, t11FspfLsrType }
    ::= { t11FspfLsrTable 1 }

T11FspfLsrEntry ::= SEQUENCE {
    t11FspfLsrDomainId           FcDomainIdOrZero,
    t11FspfLsrType               T11FspfLsrType,
    t11FspfLsrAdvDomainId        FcDomainIdOrZero,
    t11FspfLsrAge                Unsigned32,
    t11FspfLsrIncarnationNumber  Unsigned32,
    t11FspfLsrCheckSum           Unsigned32,
    t11FspfLsrLinks              Unsigned32
}

t11FspfLsrDomainId OBJECT-TYPE
    SYNTAX      FcDomainIdOrZero
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
           "Domain Id of the LSR owner in this Fabric.  It is the
           Link State Id of this LSR."
    ::= { t11FspfLsrEntry 1 }

t11FspfLsrType OBJECT-TYPE
    SYNTAX      T11FspfLsrType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
           "Type of this LSR."
    ::= { t11FspfLsrEntry 2 }

t11FspfLsrAdvDomainId OBJECT-TYPE
    SYNTAX      FcDomainIdOrZero
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
           "Domain Id of the switch that is advertising the LSR on

Expires November 2006                                          [Page 25]



Internet Draft           Fibre-Channel FSPF MIB                 May 2006

           the behalf of the switch owning it."
    ::= { t11FspfLsrEntry 3 }

t11FspfLsrAge OBJECT-TYPE
    SYNTAX      Unsigned32 (0..65535)
    UNITS       "Seconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
           "The time since this LSR was inserted into the database."
    ::= { t11FspfLsrEntry 4 }

t11FspfLsrIncarnationNumber OBJECT-TYPE
    SYNTAX      Unsigned32 (0..4294967295)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
           "The link state incarnation number of this LSR. This is
           used to identify most recent instance of an LSR while
           updating the topology database when an LSR is received.
           The updating of an LSR includes incrementing its
           incarnation number prior to transmission of the updated
           LSR.  So, the most recent LSR is the one with the
           largest incarnation number."
    ::= { t11FspfLsrEntry 5 }

t11FspfLsrCheckSum OBJECT-TYPE
    SYNTAX      Unsigned32 (0..65535)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
           "The checksum of the LSR."
    ::= { t11FspfLsrEntry 6 }

t11FspfLsrLinks OBJECT-TYPE
    SYNTAX      Unsigned32 (0..65355)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
           "Number of entries in the t11FspfLinkTable associated with
           this LSR."
    ::= { t11FspfLsrEntry 7 }

Expires November 2006                                          [Page 26]



Internet Draft           Fibre-Channel FSPF MIB                 May 2006

--
-- t11FspfLinkTable

t11FspfLinkNumber  OBJECT-TYPE
    SYNTAX      Unsigned32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The number of rows in the t11FspfLinkTable."
        ::= { t11FspfDatabase 3 }

t11FspfLinkTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF T11FspfLinkEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
           "This table contains the list of Inter-Switch Links and
           their information which is part of an LSR, either
           received or transmitted."
    ::= { t11FspfDatabase 4 }

t11FspfLinkEntry OBJECT-TYPE
    SYNTAX      T11FspfLinkEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
           "An entry which contains information about a link
           contained in an LSR in this Fabric. An entry is created
           whenever a new link appears in an (issued or received)
           LSR.  An entry is deleted when a link no longer appears
           in an (issued or received) LSR."
    INDEX      { fcmInstanceIndex, fcmSwitchIndex, t11FspfFabricIndex,
                 t11FspfLsrDomainId, t11FspfLsrType, t11FspfLinkIndex}
    ::= { t11FspfLinkTable 1 }

T11FspfLinkEntry ::= SEQUENCE {
    t11FspfLinkIndex             Unsigned32,
    t11FspfLinkNbrDomainId       FcDomainIdOrZero,
    t11FspfLinkPortIndex         Unsigned32,
    t11FspfLinkNbrPortIndex      Unsigned32,
    t11FspfLinkType              T11FspfLinkType,
    t11FspfLinkCost              Integer32
}

t11FspfLinkIndex OBJECT-TYPE

Expires November 2006                                          [Page 27]



Internet Draft           Fibre-Channel FSPF MIB                 May 2006

    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
           "An arbitrary index of this link."
    ::= { t11FspfLinkEntry 1 }

t11FspfLinkNbrDomainId OBJECT-TYPE
    SYNTAX      FcDomainIdOrZero
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
           "The Domain Id of the neighbor on the other end of this
           link in this Fabric."
    ::= { t11FspfLinkEntry 2 }

t11FspfLinkPortIndex OBJECT-TYPE
    SYNTAX      Unsigned32 (0..16777215)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
           "The source E_port of this link, as indicated by the index
           value in the LSR received from the switch identified by
           't11FspfLsrDomainId'."
    ::= { t11FspfLinkEntry 3 }

t11FspfLinkNbrPortIndex OBJECT-TYPE
    SYNTAX      Unsigned32 (0..16777215)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
           "The destination E_port of this link, as indicated by the
           index value in the LSR received from the switch identified
           by 't11FspfLinkNbrDomainId'."
    ::= { t11FspfLinkEntry 4 }

t11FspfLinkType OBJECT-TYPE
    SYNTAX      T11FspfLinkType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
           "The type of this link."
    ::= { t11FspfLinkEntry 5 }

t11FspfLinkCost OBJECT-TYPE

Expires November 2006                                          [Page 28]



Internet Draft           Fibre-Channel FSPF MIB                 May 2006

    SYNTAX      Integer32 (0..65535)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
           "The cost of sending a frame on this link in this Fabric.
           Link cost is calculated using a formula:

                 link cost = S * (1.0625e12 / Signalling Rate)

           For issued LSRs, S is determined by the value of
           t11FspfIfLinkCostFactor for the corresponding interface
           and Fabric."
    ::= { t11FspfLinkEntry 6 }

--
-- Notification-related object

t11FspfIfPrevNbrState OBJECT-TYPE
    SYNTAX      T11FspfInterfaceState
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
           "The previous state of FSPF's Neighbor Finite State
           Machine on an interface.

           This object is only used in the
           't11FspfNbrStateChangNotify' notification."
    ::= { t11FspfConfiguration 3 }

--
-- Notifications

t11FspfNbrStateChangNotify NOTIFICATION-TYPE
    OBJECTS     { ifIndex,
                  t11FamConfigDomainId,
                  t11FspfIfNbrDomainId,
                  t11FspfIfNbrState,
                  t11FspfIfPrevNbrState
    }
    STATUS      current
    DESCRIPTION
           "This notification signifies that there has been a change in
           the state of an FSPF neighbor. This is generated when the
           FSPF state changes to a terminal state, either through
           regression (i.e., goes from Full to Init or Down) or

Expires November 2006                                          [Page 29]



Internet Draft           Fibre-Channel FSPF MIB                 May 2006

           progression (i.e., from any state to Full).  The value of
           't11FspfIfNbrState' is the state of the neighbor after the
           change."
    ::= { t11FspfNotifications 1 }

--
-- Conformance

t11FspfMIBCompliances
    OBJECT IDENTIFIER ::= { t11FspfConformance 1 }

t11FspfMIBGroups
    OBJECT IDENTIFIER ::= { t11FspfConformance 2 }

t11FspfMIBCompliance MODULE-COMPLIANCE
    STATUS     current
    DESCRIPTION
           "The compliance statement for entities which
           implement the FSPF."
    MODULE -- this module
        MANDATORY-GROUPS { t11FspfGeneralGroup,
                           t11FspfIfGroup,
                           t11FspfDatabaseGroup,
                           t11FspfNotificationGroup }

        GROUP      t11FspfIfCounterGroup
        DESCRIPTION
               "These counters, for particular FSPF-packet
               occurrences on an interface, are mandatory only
               for those systems which count such events."

        OBJECT     t11FspfIfRowStatus
        SYNTAX     INTEGER { active(1) }
        MIN-ACCESS read-only
        DESCRIPTION
               "Write access is not required, and so, only
               one value need to be supported."

        OBJECT     t11FspfIfStorageType
        MIN-ACCESS read-only
        DESCRIPTION
               "Write access is not required."

        OBJECT     t11FspfNbrStateChangNotifyEnable
        MIN-ACCESS read-only

Expires November 2006                                          [Page 30]



Internet Draft           Fibre-Channel FSPF MIB                 May 2006

        DESCRIPTION
               "Write access is not required."

        OBJECT     t11FspfMinLsArrival
        MIN-ACCESS read-only
        DESCRIPTION
               "Write access is not required."

        OBJECT     t11FspfMinLsInterval
        MIN-ACCESS read-only
        DESCRIPTION
               "Write access is not required."

        OBJECT     t11FspfAdminStatus
        MIN-ACCESS read-only
        DESCRIPTION
               "Write access is not required."

        OBJECT     t11FspfSetToDefault
        MIN-ACCESS read-only
        DESCRIPTION
               "Write access is not required."

        OBJECT     t11FspfStorageType
        MIN-ACCESS read-only
        DESCRIPTION
               "Write access is not required."

        OBJECT     t11FspfIfHelloInterval
        MIN-ACCESS read-only
        DESCRIPTION
               "Write access is not required."

        OBJECT     t11FspfIfDeadInterval
        MIN-ACCESS read-only
        DESCRIPTION
               "Write access is not required."

        OBJECT     t11FspfIfRetransmitInterval
        MIN-ACCESS read-only
        DESCRIPTION
               "Write access is not required."

        OBJECT     t11FspfIfAdminStatus
        MIN-ACCESS read-only

Expires November 2006                                          [Page 31]



Internet Draft           Fibre-Channel FSPF MIB                 May 2006

        DESCRIPTION
               "Write access is not required."

        OBJECT     t11FspfIfSetToDefault
        MIN-ACCESS read-only
        DESCRIPTION
               "Write access is not required."

        OBJECT     t11FspfIfLinkCostFactor
        MIN-ACCESS read-only
        DESCRIPTION
               "Write access is not required."

        ::= { t11FspfMIBCompliances 1 }

-- Units of Conformance

t11FspfGeneralGroup OBJECT-GROUP
    OBJECTS  { t11FspfMinLsArrival,
               t11FspfMinLsInterval,
               t11FspfLsRefreshTime,
               t11FspfMaxAge,
               t11FspfMaxAgeDiscards,
               t11FspfPathComputations,
               t11FspfChecksumErrors,
               t11FspfLsrs,
               t11FspfCreateTime,
               t11FspfAdminStatus,
               t11FspfOperStatus,
               t11FspfNbrStateChangNotifyEnable,
               t11FspfSetToDefault,
               t11FspfStorageType }
    STATUS   current
    DESCRIPTION
           "A collection of objects for displaying and
           configuring FSPF parameters."
    ::= { t11FspfMIBGroups 1 }

t11FspfIfGroup OBJECT-GROUP
    OBJECTS  { t11FspfIfHelloInterval,
               t11FspfIfDeadInterval,
               t11FspfIfRetransmitInterval,
               t11FspfIfNbrState,
               t11FspfIfNbrDomainId,
               t11FspfIfNbrPortIndex,

Expires November 2006                                          [Page 32]



Internet Draft           Fibre-Channel FSPF MIB                 May 2006

               t11FspfIfAdminStatus,
               t11FspfIfCreateTime,
               t11FspfIfSetToDefault,
               t11FspfIfLinkCostFactor,
               t11FspfIfRowStatus,
               t11FspfIfStorageType,
               t11FspfIfPrevNbrState }
    STATUS   current
    DESCRIPTION
           "A collection of objects for displaying the FSPF
           interface information."
    ::= { t11FspfMIBGroups 2 }

t11FspfIfCounterGroup OBJECT-GROUP
    OBJECTS  { t11FspfIfInLsuPkts,
               t11FspfIfInLsaPkts,
               t11FspfIfOutLsuPkts,
               t11FspfIfOutLsaPkts,
               t11FspfIfOutHelloPkts,
               t11FspfIfInHelloPkts,
               t11FspfIfRetransmittedLsuPkts,
               t11FspfIfInErrorPkts  }
    STATUS   current
    DESCRIPTION
            "A collection of objects for counting particular
            FSPF-packet occurrences on an interface."
    ::= { t11FspfMIBGroups 3 }

t11FspfDatabaseGroup OBJECT-GROUP
    OBJECTS  { t11FspfLsrAdvDomainId,
               t11FspfLsrAge,
               t11FspfLsrIncarnationNumber,
               t11FspfLsrCheckSum,
               t11FspfLsrLinks,
               t11FspfLinkNbrDomainId,
               t11FspfLinkPortIndex,
               t11FspfLinkNbrPortIndex,
               t11FspfLinkType,
               t11FspfLinkCost,
               t11FspfLinkNumber }
    STATUS   current
    DESCRIPTION
           "A collection of objects for displaying the FSPF
           topology database information."
    ::= { t11FspfMIBGroups 4 }

Expires November 2006                                          [Page 33]



Internet Draft           Fibre-Channel FSPF MIB                 May 2006

t11FspfNotificationGroup NOTIFICATION-GROUP
    NOTIFICATIONS  { t11FspfNbrStateChangNotify }
    STATUS   current
    DESCRIPTION
           "A collection of notifications for FSPF."
    ::= { t11FspfMIBGroups 5 }
END

7.  Intellectual Property

   "The IETF takes no position regarding the validity or scope of any
   intellectual property or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; neither does it represent that it
   has made any effort to identify any such rights.  Information on the
   IETF's procedures with respect to rights in standards-track and
   standards-related documentation can be found in BCP-11.  Copies of
   claims of rights made available for publication and any assurances of
   licenses to be made available, or the result of an attempt made to
   obtain a general license or permission for the use of such
   proprietary rights by implementors or users of this specification can
   be obtained from the IETF Secretariat."

   "The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights which may cover technology that may be required to practice
   this standard.  Please address the information to the IETF Executive
   Director."

8.  Acknowledgements

   This document was originally developed and approved by the INCITS
   Task Group T11.5 (http://www.t11.org) as the SM-FSM project.  We wish
   to acknowledge the many contributions and comments from the INCITS
   Technical Committee T11, including the following:

      T11 Chair: Robert Snively, Brocade
      T11 Vice Chair: Claudio DeSanti, Cisco Systems
      T11.5 Chair: Roger Cummings, Symantec
      T11.5 members, especially:
          Ken Hirata, Emulex
          Scott Kipp, McData

Expires November 2006                                          [Page 34]



Internet Draft           Fibre-Channel FSPF MIB                 May 2006

          Elizabeth G. Rodriguez, Dot Hill

The document was subsequently approved by the IETF's IMSS Working Group,
chaired by David Black (EMC Corporation).  We also wish to acknowledge
Bert Wijnen (Lucent Technologies), the IETF Area Director, for his
review of the document.

9.  Normative References

[RFC2578]
     McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose, M.
     and S. Waldbusser, "Structure of Management Information Version 2
     (SMIv2)", STD 58, RFC 2578, April 1999.

[RFC2579]
     McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose, M.
     and S. Waldbusser, "Textual Conventions for SMIv2", STD 58, RFC
     2579, April 1999.

[RFC2580]
     McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose, M.
     and S. Waldbusser, "Conformance Statements for SMIv2", STD 58, RFC
     2580, April 1999.

[RFC2863]
     McCloghrie, K., and F. Kastenholz, "The Interface$ Group MIB", RFC
     2863, June 2000.

[RFC3411]
     Harrington, D., Presuhn, R., and B. Wijnen, "An Architecture for
     Describing Simple Network Management Protocol (SNMP) Management
     Frameworks", STD 58, RFC 3411, December 2002.

[FC-FS]
     "Fibre Channel - Framing and Signaling (FC-FS)" ANSI INCITS
     373-2003, April 2003.

[FC-SW-4]
     "Fibre Channel - Switch Fabric - 4 (FC-SW-4)", ANSI INCITS
     418-2006, 2006.

[FC-MGMT]
     K. McCloghrie, "Fibre Channel Management MIB", RFC 4044, May 2005.

Expires November 2006                                          [Page 35]



Internet Draft           Fibre-Channel FSPF MIB                 May 2006

[FC-FAM-MIB]
     DeSanti, C., Gaonkar, V., McCloghrie, K., and S. Gai, "Fibre-
     Channel Fabric Address Manager MIB", Internet-Draft (draft-ietf-
     imss-fc-fam-mib-nn.txt), work-in-progress.

[FC-RTM-MIB]
     DeSanti, C., Kode, S., McCloghrie, K., and S. Gai, "Fibre-Channel
     Routing Information MIB", Internet-Draft (draft-ietf-imss-fc-rtm-
     mib-nn.txt), work-in-progress.

10.  Informative References

[RFC2741]
     Daniele, M., Wijnen, B., Ellison, M., and D. Francisco, "Agent
     Extensibility (AgentX) Protocol Version 1", RFC 2741, January 2000.

[RFC2837]
     Teow, K., "Definitions of Managed Objects for the Fabric Element in
     Fibre Channel Standard", RFC 2837, May 2000.

[RFC3410]
     Case, J., Mundy, R., Partain, D. and B. Stewart, "Introduction and
     Applicability Statements for Internet- Standard Management
     Framework", RFC 3410, December 2002.

11.  IANA Considerations

   IANA is requested to make a MIB OID assignment for the T11-FC-FSPF-
   MIB module under the appropriate subtree.

12.  Security Considerations

   There are several management objects defined in this MIB module with
   a MAX-ACCESS clause of read-write and/or read-create.  Such objects
   may be considered sensitive or vulnerable in some network
   environments.  The support for SET operations in a non-secure
   environment without proper protection can have a negative effect on
   network operations.  These objects and their
   sensitivity/vulnerability are:

        t11FspfMinLsArrival, t11FspfMinLsInterval,
        t11FspfIfHelloInterval, t11FspfIfDeadInterval &
        t11FspfIfRetransmitInterval

Expires November 2006                                          [Page 36]



Internet Draft           Fibre-Channel FSPF MIB                 May 2006

           -- alter the responsiveness of the FSPF protocol

        t11FspfAdminStatus & t11FspfIfAdminStatus
           -- enable/disable dynamic routing via FSPF

        t11FspfSetToDefault & t11FspfIfSetToDefault
           -- nullify valid configuration changes

        t11FspfIfLinkCostFactor
           -- alter the choice of links

        t11FspfNbrStateChangNotifyEnable
           -- enable/disable notifications.

   The support for SET operations in a non-secure environment without
   proper protection can have a negative effect on network operations.

   Some of the readable objects in this MIB module (i.e., objects with a
   MAX-ACCESS other than not-accessible) may be considered sensitive or
   vulnerable in some network environments.  It is thus important to
   control even GET and/or NOTIFY access to these objects and possibly
   to even encrypt the values of these objects when sending them over
   the network via SNMP.  These are the tables and objects and their
   sensitivity/vulnerability:

      t11FspfTable -- contains per-Fabric parameters and statistics

      t11FspfIfTable -- contains per-interface parameters and statistics

      t11FspfLsrTable & t11FspfLinkTable -- database of LSR information,

   SNMP versions prior to SNMPv3 did not include adequate security.
   Even if the network itself is secure (for example by using IPSec),
   even then, there is no control as to who on the secure network is
   allowed to access and GET/SET (read/change/create/delete) the objects
   in this MIB module.

   It is RECOMMENDED that implementors consider the security features as
   provided by the SNMPv3 framework (see [RFC3410], section 8),
   including full support for the SNMPv3 cryptographic mechanisms (for
   authentication and privacy).

   Further, deployment of SNMP versions prior to SNMPv3 is NOT
   RECOMMENDED.  Instead, it is RECOMMENDED to deploy SNMPv3 and to
   enable cryptographic security.  It is then a customer/operator

Expires November 2006                                          [Page 37]



Internet Draft           Fibre-Channel FSPF MIB                 May 2006

   responsibility to ensure that the SNMP entity giving access to an
   instance of this MIB module is properly configured to give access to
   the objects only to those principals (users) that have legitimate
   rights to indeed GET or SET (change/create/delete) them.

13.  Authors' Addresses

   Claudio DeSanti
   Cisco Systems, Inc.
   170 West Tasman Drive
   San Jose, CA 95134 USA
   Phone: +1 408 853-9172
   EMail: cds@cisco.com

   Vinay Gaonkar
   Cisco Systems, Inc.
   170 West Tasman Drive
   San Jose, CA 95134 USA
   Phone: +1 408 527-8576
   EMail: vgaonkar@cisco.com

   Keith McCloghrie
   Cisco Systems, Inc.
   170 West Tasman Drive
   San Jose, CA USA 95134
   Phone: +1 408-526-5260
   Email: kzm@cisco.com

   Silvano Gai
   Retired

Full Copyright Statement

   Copyright (C) The Internet Society (2006).  This document is subject
   to the rights, licenses and restrictions contained in BCP 78, and
   except as set forth therein, the authors retain all their rights.

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
   ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
   INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Expires November 2006                                          [Page 38]



Internet Draft           Fibre-Channel FSPF MIB                 May 2006

Disclaimer of validity

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.

Acknowledgment

   Funding for the RFC Editor function is currently provided by the
   Internet Society.

Expires November 2006                                          [Page 39]