Skip to main content

Name Attributes for the GSS-API EAP mechanism
draft-ietf-abfab-gss-eap-naming-02

The information below is for an old version of the document.
Document Type
This is an older version of an Internet-Draft that was ultimately published as RFC 7056.
Authors Sam Hartman , Josh Howlett
Last updated 2012-03-12
Replaces draft-hartman-gss-eap-naming
RFC stream Internet Engineering Task Force (IETF)
Formats
Reviews
Additional resources Mailing list discussion
Stream WG state WG Document
Document shepherd (None)
IESG IESG state Became RFC 7056 (Proposed Standard)
Consensus boilerplate Unknown
Telechat date (None)
Responsible AD (None)
Send notices to (None)
draft-ietf-abfab-gss-eap-naming-02
Network Working Group                                         S. Hartman
Internet-Draft                                         Painless Security
Intended status: Standards Track                              J. Howlett
Expires: September 13, 2012                                    JANET(UK)
                                                          March 12, 2012

             Name Attributes for the GSS-API EAP mechanism
                   draft-ietf-abfab-gss-eap-naming-02

Abstract

   The naming extensions to the Generic Security Services Application
   Programming interface provide a mechanism for applications to
   discover authorization and personalization information associated
   with GSS-API names.  The Extensible Authentication Protocol GSS-API
   mechanism allows an Authentication/Authorization/Accounting peer to
   provide authorization attributes along side an authentication
   response.  It also provides mechanisms to process Security Assertion
   Markup Language (SAML) messages provided in the AAA response.  This
   document describes the necessary information to use the naming
   extensions API to access that information.

Status of this Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on September 13, 2012.

Copyright Notice

   Copyright (c) 2012 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of

Hartman & Howlett      Expires September 13, 2012               [Page 1]
Internet-Draft           GSS EAP Name Attributes              March 2012

   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  3
   2.  Requirements notation  . . . . . . . . . . . . . . . . . . . .  4
   3.  Naming Extensions and SAML . . . . . . . . . . . . . . . . . .  5
   4.  Federated Context  . . . . . . . . . . . . . . . . . . . . . .  6
   5.  Name Attributes for GSS-EAP  . . . . . . . . . . . . . . . . .  7
   6.  Names of SAML Attributes in the Federated Context  . . . . . .  8
     6.1.  Assertions . . . . . . . . . . . . . . . . . . . . . . . .  8
     6.2.  SAML Attributes  . . . . . . . . . . . . . . . . . . . . .  8
     6.3.  SAML Name Identifiers  . . . . . . . . . . . . . . . . . .  8
   7.  Security Considerations  . . . . . . . . . . . . . . . . . . . 10
   8.  IANA Considerations  . . . . . . . . . . . . . . . . . . . . . 11
   9.  Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 12
   10. References . . . . . . . . . . . . . . . . . . . . . . . . . . 13
     10.1. Normative References . . . . . . . . . . . . . . . . . . . 13
     10.2. Informative References . . . . . . . . . . . . . . . . . . 13
   Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 14

Hartman & Howlett      Expires September 13, 2012               [Page 2]
Internet-Draft           GSS EAP Name Attributes              March 2012

1.  Introduction

   The naming extensions [I-D.ietf-kitten-gssapi-naming-exts]to the
   Generic Security Services Application Programming interface (GSS-API)
   [RFC2743] provide a mechanism for applications to discover
   authorization and personalization information associated with GSS-API
   names.  The Extensible Authentication Protocol GSS-API mechanism
   [I-D.ietf-abfab-gss-eap] allows an Authentication/Authorization/
   Accounting peer to provide authorization attributes along side an
   authentication response.  It also provides mechanisms to process
   Security Assertion Markup Language (SAML) messages provided in the
   AAA response.  Other mechanisms such as SAML EC
   [I-D.ietf-kitten-sasl-saml-ec] also support SAML assertions and
   attributes carried in the GSS-API.  This document describes the
   necessary information to use the naming extensions API to access SAML
   assertions in the federated context and AAA attributes.

Hartman & Howlett      Expires September 13, 2012               [Page 3]
Internet-Draft           GSS EAP Name Attributes              March 2012

2.  Requirements notation

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

Hartman & Howlett      Expires September 13, 2012               [Page 4]
Internet-Draft           GSS EAP Name Attributes              March 2012

3.  Naming Extensions and SAML

   SAML assertions can carry attributes describing properties of the
   subject of the assertion.  For example, an assertion might carry an
   attribute describing the organizational affiliation or e-mail address
   of a subject.  According to Section 8.2 and 2.7.3.1 of [SAMLCORE],
   the name of an attribute has two parts.  The first is a URI
   describing the format of the name.  The second part, whose form
   depends on the format URI, is the actual name.  GSS-API name
   attributes may take a form starting with a URI describing the form of
   the name; the rest of the name is specified by that URI.

   SAML attributes carried in GSS-API names are named with three parts.
   The first is a URN indicating that the name is a SAML attribute and
   describing the context (Section 4).  This URI is followed by a space,
   the URI indicating the format of the SAML name, a space and the SAML
   attribute name.  The URI indicating the format of the SAML attribute
   name is not optional and MUST be present.

   SAML attribute names may not be globally unique.  Many names that are
   named by URNs or URIs are likely to have semantics independent of the
   issuer.  However other name formats, including unspecified name
   formats, make it easy for two issuers to choose the same name for
   attributes with different semantics.  Attributes using the federated
   context Section 4 are issued by the same party performing the
   authentication.  So, based on who is the subject of the name, the
   semantics of the attribute can be determined.

Hartman & Howlett      Expires September 13, 2012               [Page 5]
Internet-Draft           GSS EAP Name Attributes              March 2012

4.  Federated Context

   GSS-API naming extensions have the concept of an authenticated name
   attribute.  The mechanism guarantees that the contents of an
   authenticated name attribute are an authenticated statement from the
   trusted source of the peer credential.  The fact that an attribute is
   authenticated does not imply that the trusted source of the peer
   credential is authorized to assert the attribute.

   In the federated context, the trusted source of the peer credential
   is typically some identity provider.  In the GSS EAP mechanism,
   information is combined from AAA and SAML sources.  The SAML IDP and
   home AAA server are assumed to be in the same trust domain.  However,
   this trust domain is not typically the same as the trust domain of
   the service.  With other SAML mechanisms using this specification,
   the SAML assertion also comes from the party performing
   authentication.  Typically, the IDP is run by another organization in
   the same federation.  The IDP is trusted to make some statements,
   particularly related to the context of a federation.  For example, an
   academic federation's participants would typically trust an IDP's
   assertions about whether someone was a student or a professor.
   However that same IDP would not typically be trusted to make
   assertions about local entitlements such as group membership.  Thus,
   a service MUST make a policy decision about whether the IDP is
   permitted to assert a particular attribute and about whether the
   asserted value is acceptable.

   In contrast, attributes in an enterprise context are often verified
   by a central authentication infrastructure that is trusted to assert
   most or all attributes.  For example, in a Kerberos infrastructure,
   the KDC typically indicates group membership information for clients
   to a server using KDC-authenticated authorization data.

   The context of an attribute is an important property of that
   attribute; trust context is an important part of this overall
   context.  In order for applications to distinguish the context of
   attributes, attributes with different context need different names.
   This specification defines attribute names for SAML and AAA
   attributes in the federated context.

   These names MUST not be used for attributes issued by a party other
   than one closely associated with the source of credentials unless the
   source of credentials is re-asserting the attributes.  For example, a
   source of credentials can consult whatever sources of attributes it
   chooses, but acceptors can assume attributes in the federated context
   are from the source of credentials.

Hartman & Howlett      Expires September 13, 2012               [Page 6]
Internet-Draft           GSS EAP Name Attributes              March 2012

5.  Name Attributes for GSS-EAP

   This section describes how RADIUS attributes received with the GSS-
   EAP mechanism are named.

   The first portion of the name is urn:ietf:params:gss:radius-attr (a
   URN indicating that this is a GSS-EAP RADIUS AVP).  This is followed
   by a space and a numeric RADIUS name as described by section 2.6 of
   [I-D.ietf-radext-radius-extensions].  For example the name of the
   User-Name attribute is "urn:ietf:gss:radius-attr 1".  The name of
   extended type 1 within type 241 would be "urn:ietf:gss:radius-attr
   241.1".

   The value of RADIUS attributes is the raw octets of the packet.
   Integers are in network byte order.  The display value SHOULD be a
   human readable string; an implementation can only produce this string
   if it knows the type of a given RADIUS attribute.

Hartman & Howlett      Expires September 13, 2012               [Page 7]
Internet-Draft           GSS EAP Name Attributes              March 2012

6.  Names of SAML Attributes in the Federated Context

6.1.  Assertions

   An assertion generated by the credential source is named by
   "urn:ietf:params:gss:fed-saml-assertion".  The value of this
   attribute is the assertion carried in the AAA protocol or used for
   authentication in a SAML mechanism.  This attribute is absent from a
   given acceptor name if no such assertion is present or if the
   assertion fails local policy checks.  This attribute is always
   authentic when present: authentication only succeeds if the AAA
   exchange is successfully authenticated.  However, users of the GSS-
   API MUST confirm that the attribute is authenticated because some
   mechanisms MAY permit an initiator to assert an unauthenticated
   version of this attribute.

6.2.  SAML Attributes

   Each attribute carried in the assertion SHOULD also be a GSS name
   attribute.  The name of this attribute has three parts, all separated
   by an ASCII space character.  The first part is
   urn:ietf:params:gss:fed-saml-attr.  The second part is the URI for
   the <saml:Attribute> element's NameFormat XML attribute.  The final
   part is the <saml:Attribute> element's Name XML attribute.

   If the content of each <saml:AttributeValue> element is a simple text
   node (or nodes), then the raw and "display" values of the GSS name
   attribute MUST be the text content of the element(s).  The raw value
   MUST be encoded as UTF-8.

   If the value is not simple, then the raw value(s) of the GSS name
   attribute MUST be the well-formed serialization of the <saml:
   AttributeValue> element(s) encoded as UTF-8.  The "display" values
   are implementation-defined.

   These attributes SHOULD be marked authenticated if they are contained
   in SAML assertions that have been successfully validated back to the
   trusted source of the peer credential.  In the GSS-EAP mechanism, a
   SAML assertion carried in an integrity-protected and authenticated
   AAA protocol SHALL be sufficiently validated.  An implementation MAY
   apply local policy checks to this assertion and discard it if it is
   unacceptable according to these checks.

6.3.  SAML Name Identifiers

   The <saml:NameID> carried in the subject of the assertion SHOULD also
   be a GSS name attribute.  The name of this attribute has two parts,
   separated by an ASCII space character.  The first part is

Hartman & Howlett      Expires September 13, 2012               [Page 8]
Internet-Draft           GSS EAP Name Attributes              March 2012

   urn:ietf:params:gss:fed-saml-nameid.  The second part is the URI for
   the <saml:NameID> element's Format XML attribute.

   The raw value of the GSS name attribute MUST be the well-formed
   serialization of the <saml:NameID> element encoded as UTF-8.  The
   "display" value is implementation-defined.  For formats defined by
   section 8.3 of [SAMLCORE], missing values of the NameQualifier or
   SPNameQualifier XML attributes MUST be populated in accordance with
   the definition of the format prior to serialization.  In other words,
   the defaulting rules specified for the "persistent" and "transient"
   formats MUST be applied prior to serialization.

   This attribute SHOULD be marked authenticated if the name identifier
   is contained in a SAML assertion that has been successfully validated
   back to the trusted source of the peer credential.  In the GSS-EAP
   mechanism, a SAML assertion carried in an integrity-protected and
   authenticated AAA protocol SHALL be sufficiently validated.  An
   implementation MAY apply local policy checks to this assertion and
   discard it if it is unacceptable according to these checks.

Hartman & Howlett      Expires September 13, 2012               [Page 9]
Internet-Draft           GSS EAP Name Attributes              March 2012

7.  Security Considerations

   This document describes how to access RADIUS attributes, SAML
   attributes and SAML assertions from some GSS-API mechanisms.  These
   attributes are typically used for one of two purposes.  The least
   sensitive is personalization: a central service MAY provide
   information about an authenticated user so they need not enter it
   with each acceptor they access.  A more sensitive use is
   authorization.

   The mechanism is responsible for authentication and integrity
   protection of the attributes.  However, the acceptor application is
   responsible for making a decision about whether the credential source
   is trusted to assert the attribute and validating the asserted value.

Hartman & Howlett      Expires September 13, 2012              [Page 10]
Internet-Draft           GSS EAP Name Attributes              March 2012

8.  IANA Considerations

   First, a new registry needs to be created for GSS URNs.  Then, this
   needs to be registered in the IETF's URN registry.  Then this
   registry needs to be populated with URN items from this spec.

Hartman & Howlett      Expires September 13, 2012              [Page 11]
Internet-Draft           GSS EAP Name Attributes              March 2012

9.  Acknowledgements

   Scott Cantor contributed significant text and multiple reviews of
   this document.

Hartman & Howlett      Expires September 13, 2012              [Page 12]
Internet-Draft           GSS EAP Name Attributes              March 2012

10.  References

10.1.  Normative References

   [I-D.ietf-abfab-gss-eap]
              Hartman, S. and J. Howlett, "A GSS-API Mechanism for the
              Extensible Authentication Protocol",
              draft-ietf-abfab-gss-eap-05 (work in progress),
              March 2012.

   [I-D.ietf-kitten-gssapi-naming-exts]
              Williams, N., Johansson, L., Hartman, S., and S.
              Josefsson, "GSS-API Naming Extensions",
              draft-ietf-kitten-gssapi-naming-exts-13 (work in
              progress), March 2012.

   [I-D.ietf-radext-radius-extensions]
              DeKok, A. and A. Lior, "Remote Authentication Dial In User
              Service (RADIUS) Protocol Extensions",
              draft-ietf-radext-radius-extensions-04 (work in progress),
              January 2012.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC2743]  Linn, J., "Generic Security Service Application Program
              Interface Version 2, Update 1", RFC 2743, January 2000.

10.2.  Informative References

   [I-D.ietf-kitten-sasl-saml-ec]
              Cantor, S. and S. Josefsson, "SAML Enhanced Client SASL
              and GSS-API Mechanisms", draft-ietf-kitten-sasl-saml-ec-01
              (work in progress), February 2012.

Hartman & Howlett      Expires September 13, 2012              [Page 13]
Internet-Draft           GSS EAP Name Attributes              March 2012

Authors' Addresses

   Sam Hartman
   Painless Security

   Email: hartmans-ietf@mit.edu

   Josh Howlett
   JANET(UK)

   Email: josh.howlett@ja.net

Hartman & Howlett      Expires September 13, 2012              [Page 14]