Skip to main content

Advertising L2 Bundle Member Link Attributes in IS-IS
draft-ginsberg-isis-l2bundles-02

Document Type Replaced Internet-Draft (isis WG)
Expired & archived
Authors Les Ginsberg , Ahmed Bashandy , Clarence Filsfils , Stefano Previdi , Mohan Nanduri , Ebben Aries
Last updated 2017-02-22 (Latest revision 2016-02-16)
Replaced by draft-ietf-isis-l2bundles
RFC stream Internet Engineering Task Force (IETF)
Intended RFC status (None)
Formats
Additional resources Mailing list discussion
Stream WG state Adopted by a WG
Other - see Comment Log
Document shepherd (None)
IESG IESG state Replaced by draft-ietf-isis-l2bundles
Consensus boilerplate Unknown
Telechat date (None)
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

Abstract

There are deployments where the Layer 3 interface on which IS-IS operates is a Layer 2 interface bundle. Existing IS-IS advertisements only support advertising link attributes of the Layer 3 interface. If entities external to IS-IS wish to control traffic flows on the individual physical links which comprise the Layer 2 interface bundle link attribute information about the bundle members is required. This document introduces the ability for IS-IS to advertise the link attributes of layer 2 (L2) bundle members.

Authors

Les Ginsberg
Ahmed Bashandy
Clarence Filsfils
Stefano Previdi
Mohan Nanduri
Ebben Aries

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)