A Connectivity Monitoring Metric for IPPM
draft-geib-ippm-connectivity-monitoring-03
Document | Type | Replaced Internet-Draft (ippm WG) | |
---|---|---|---|
Author | Ruediger Geib | ||
Last updated | 2020-12-04 (latest revision 2020-07-03) | ||
Replaced by | draft-ietf-ippm-connectivity-monitoring | ||
Stream | Internet Engineering Task Force (IETF) | ||
Intended RFC status | (None) | ||
Formats |
Expired & archived
pdf
htmlized (tools)
htmlized
bibtex
|
||
Stream | WG state | Adopted by a WG | |
Document shepherd | No shepherd assigned | ||
IESG | IESG state | Replaced by draft-ietf-ippm-connectivity-monitoring | |
Consensus Boilerplate | Unknown | ||
Telechat date | |||
Responsible AD | (None) | ||
Send notices to | (None) |
This Internet-Draft is no longer active. A copy of
the expired Internet-Draft can be found at
https://www.ietf.org/archive/id/draft-geib-ippm-connectivity-monitoring-03.txt
https://www.ietf.org/archive/id/draft-geib-ippm-connectivity-monitoring-03.txt
Abstract
Within a Segment Routing domain, segment routed measurement packets can be sent along pre-determined paths. This enables new kinds of measurements. Connectivity monitoring allows to supervise the state and performance of a connection or a (sub)path from one or a few central monitoring systems. This document specifies a suitable type-P connectivity monitoring metric.
Authors
Ruediger Geib (Ruediger.Geib@telekom.de)
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)