A SNMP MIB to manage black-link optical interface parameters of DWDM applications
draft-galimbe-kunze-g-698-2-snmp-mib-02
| Document | Type |
Expired Internet-Draft
(individual)
Expired & archived
|
|
|---|---|---|---|
| Authors | Ruediger Kunze , Dharini Hiremagalur | ||
| Last updated | 2012-09-07 (Latest revision 2012-03-06) | ||
| RFC stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Expired | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This memo defines a portion of the Management Information Base (MIB) used by Simple Network Management Protocol (SNMP) in TCP/IP- based internets. In particular, it defines objects for managing Optical parameters associated with Wavelength Division Multiplexing (WDM) systems or characterized by the Optical Transport Network (OTN) in accordance with the Black-Link approach defined in ITU-T Recommendation G.698.2. [ITU.G698.2] The MIB module defined in this memo can be used for Optical Parameters monitoring and/or configuration of the endpoints of Black Links.
Authors
Ruediger Kunze
Dharini Hiremagalur
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)