A YANG model to manage the optical parameters for in a WDM network
draft-galimbe-ccamp-iv-yang-10

Document Type Expired Internet-Draft (individual)
Last updated 2020-09-14 (latest revision 2020-03-13)
Stream (None)
Intended RFC status (None)
Formats
Expired & archived
pdf htmlized (tools) htmlized bibtex
Yang Validation 0 errors, 2 warnings.
Additional Resources
- Yang catalog entry for ietf-opt-parameters-wdm@2020-03-13.yang
- Yang impact analysis for draft-galimbe-ccamp-iv-yang
Stream Stream state (No stream defined)
Consensus Boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Expired
Telechat date
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft can be found at
https://www.ietf.org/archive/id/draft-galimbe-ccamp-iv-yang-10.txt

Abstract

This memo defines a Yang model that translate the information model to support Impairment-Aware (IA) Routing and Wavelength Assignment (RWA) functionality. The information model is defined in draft-ietf- ccamp-wson-iv-info and draft-martinelli-ccamp-wson-iv-encode. This document defines proper encoding and extend to the models defined in draft-lee-ccamp-wson-yang tu support Impairment-Aware (IA) Routing and Wavelength Assignment (RWA) functions The Yang model defined in this memo can be used for Optical Parameters monitoring and/or configuration of the multivendor Endpoints and ROADMs. The use of this model does not guarantee interworking of transceivers over a DWDM. Optical path feasibility and interoperability has to be determined by means outside the scope of this document. The purpose of this model is to program interface parameters to consistently configure the mode of operation of transceivers.

Authors

Gabriele Galimberti (ggalimbe@cisco.com)
Ruediger Kunze (RKunze@telekom.de)
Dharini Hiremagalur (dharinih@juniper.net)
Gert Grammel (ggrammel@juniper.net)

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)