Associate PW label with PTP application
draft-fuxh-tictoc-associate-pw-with-ptp-00
| Document | Type |
Expired Internet-Draft
(individual)
Expired & archived
|
|
|---|---|---|---|
| Authors | Xihua Fu , Muliu Tao | ||
| Last updated | 2012-04-26 (Latest revision 2011-10-24) | ||
| RFC stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Expired | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
[1588overMPLS] defines two methods for transporting PTP messages (PDUs) over an MPLS network. The second method is to transport PTP messages inside a PW via Ethernet encapsulation. When PHP is applied to PTP LSP or the PW is etablished between two routers directly and no PTP LSP is needed, PW label must be associated with PTP application at the PW termination point. This document introduces a mechanism to associate PW label with PTP application.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)