Alternate Marking Extension to Active Measurement Protocol
draft-fioccola-ippm-alt-mark-active-00
| Document | Type |
This is an older version of an Internet-Draft whose latest revision state is "Expired".
Expired & archived
|
|
|---|---|---|---|
| Authors | Giuseppe Fioccola , Alexander Clemm , Mauro Cociglio , Mouli Chandramouli , Alessandro Capello | ||
| Last updated | 2017-01-08 (Latest revision 2016-07-07) | ||
| RFC stream | (None) | ||
| Formats | |||
| Additional resources | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Expired | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document describes how to extend the existing Active Measurement Protocol, in order to implement alternate marking methodology detailed in [I-D.ietf-ippm-alt-mark]. The extension for Two-Way Active Measurement Protocol (TWAMP) RFC 5357 [RFC5357] and One-way Active Measurement Protocol (OWAMP) RFC 4656 [RFC4656] will be considered. This proposal defines a simplified mechanism with benefits to the metric precision and computational load. Hybrid measurements are also enabled.
Authors
Giuseppe Fioccola
Alexander Clemm
Mauro Cociglio
Mouli Chandramouli
Alessandro Capello
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)