Anycast-RP using PIM
draft-farinacci-pim-anycast-rp-00
| Document | Type |
Replaced Internet-Draft
(individual)
Expired & archived
|
|
|---|---|---|---|
| Authors | Dino Farinacci , Yiqun Cai | ||
| Last updated | 2011-11-09 (Latest revision 2003-01-22) | ||
| Replaced by | draft-ietf-pim-anycast-rp | ||
| RFC stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Replaced by draft-ietf-pim-anycast-rp | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This proposal allows Anycast-RP to be used inside a domain which runs PIM only. There are no other multicast protocols required to support Anycast-RP, such as MSDP, which has been used traditionally to solve this problem.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)