Skip to main content

Segment routing for SDWAN paths over hybrid networks
draft-dunbar-sr-sdwan-over-hybrid-networks-06

The information below is for an old version of the document.
Document Type
This is an older version of an Internet-Draft whose latest revision state is "Expired".
Expired & archived
Authors Linda Dunbar , Mehmet Toy
Last updated 2020-05-07 (Latest revision 2019-11-04)
RFC stream (None)
Formats
Additional resources
Stream Stream state (No stream defined)
Consensus boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Expired
Telechat date (None)
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

Abstract

This document describes a method for end-to-end (E2E) SDWAN paths to traverse specific list of underlay network segments, some of which can be private networks which include SR enabled segments, some of which can be the public IP networks that do not support SR, to achieve the desired optimal E2E quality. The method described in this draft uses the principle of segment routing to enforce a SDWAN path's head-end selected route traversing through a list of specific nodes of multiple network segments without requiring the nodes in each network segment to have the intelligence (or maintaining states) of selecting next hop or next domain.

Authors

Linda Dunbar
Mehmet Toy

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)