Skip to main content

Stateful PCE extensions for MPLS-TE LSPs
draft-crabbe-pce-stateful-pce-mpls-te-00

The information below is for an old version of the document.
Document Type
This is an older version of an Internet-Draft whose latest revision state is "Replaced".
Expired & archived
Authors Edward Crabbe , Jan Medved , Ina Minei , Robert Varga
Last updated 2013-04-25 (Latest revision 2012-10-22)
Replaced by draft-ietf-pce-stateful-pce, RFC 8231
RFC stream Internet Engineering Task Force (IETF)
Formats
Additional resources
Stream WG state (None)
Document shepherd (None)
IESG IESG state Expired
Consensus boilerplate Unknown
Telechat date (None)
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

Abstract

The Path Computation Element Communication Protocol (PCEP) provides mechanisms for Path Computation Elements (PCEs) to perform path computations in response to Path Computation Clients (PCCs) requests. [I-D.ietf-pce-stateful-pce] describes a set of extensions to PCEP to provide stateful control. This document describes the objects and TLVs to be used with these PCEP extensions to control Multiprotocol Label Switching (MPLS) Traffic Engineering Label Switched Paths (TE LSP) via a stateful PCE.

Authors

Edward Crabbe
Jan Medved
Ina Minei
Robert Varga

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)