Preferred Path Routing (PPR) in IS-IS
draft-chunduri-lsr-isis-preferred-path-routing-04
Document | Type |
This is an older version of an Internet-Draft whose latest revision state is "Expired".
Expired & archived
|
|
---|---|---|---|
Authors | Uma Chunduri , Richard Li , Russ White , Jeff Tantsura , Luis M. Contreras , Yingzhen Qu | ||
Last updated | 2020-01-09 (Latest revision 2019-07-08) | ||
RFC stream | (None) | ||
Formats | |||
Additional resources | |||
Stream | Stream state | (No stream defined) | |
Consensus boilerplate | Unknown | ||
RFC Editor Note | (None) | ||
IESG | IESG state | Expired | |
Telechat date | (None) | ||
Responsible AD | (None) | ||
Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document specifies Preferred Path Routing (PPR), a routing protocol extension to simplify the path description on the packet for Segment Routing (SR) deployments and beyond. PPR aims to mitigate the MTU and data plane processing issues that may result from SR packet overhead; and also supports further extensions along the paths.
Authors
Uma Chunduri
Richard Li
Russ White
Jeff Tantsura
Luis M. Contreras
Yingzhen Qu
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)