Drone Remote Identification Protocol (DRIP) Requirements
draft-card-drip-reqs-02

Document Type Replaced Internet-Draft (drip WG)
Last updated 2020-05-12 (latest revision 2020-04-20)
Replaces draft-card-tmrid-uas, draft-card-tmrid-uas-reqs
Replaced by draft-ietf-drip-reqs
Stream IETF
Intended RFC status (None)
Formats
Expired & archived
pdf htmlized (tools) htmlized bibtex
Stream WG state Adopted by a WG
Document shepherd No shepherd assigned
IESG IESG state Replaced by draft-ietf-drip-reqs
Consensus Boilerplate Unknown
Telechat date
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft can be found at
https://www.ietf.org/archive/id/draft-card-drip-reqs-02.txt

Abstract

This document defines the requirements for Drone Remote Identification Protocol (DRIP) Working Group protocols and services to support Unmanned Aircraft System Remote Identification (UAS RID). Objectives include: complementing external technical standards as regulator-accepted means of compliance with UAS RID regulations; facilitating use of existing Internet resources to support UAS RID and to enable enhanced related services; and enabling verification that UAS RID information is trustworthy (to some extent, even in the absence of Internet connectivity at the receiving node).

Authors

Stuart Card (stu.card@axenterprize.com)
Adam Wiethuechter (adam.wiethuechter@axenterprize.com)
Robert Moskowitz (rgm@labs.htt-consult.com)

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)