MPLS Flow Identification Considerations
draft-bryant-mpls-flow-ident-03
| Document | Type | Replaced Internet-Draft (mpls WG) | |
|---|---|---|---|
| Last updated | 2015-12-17 (latest revision 2015-11-02) | ||
| Replaced by | draft-ietf-mpls-flow-ident | ||
| Stream | IETF | ||
| Intended RFC status | (None) | ||
| Formats |
Expired & archived
pdf
htmlized
bibtex
|
||
| Stream | WG state | Adopted by a WG | |
| Document shepherd | No shepherd assigned | ||
| IESG | IESG state | Replaced by draft-ietf-mpls-flow-ident | |
| Consensus Boilerplate | Unknown | ||
| Telechat date | |||
| Responsible AD | (None) | ||
| Send notices to | (None) | ||
https://www.ietf.org/archive/id/draft-bryant-mpls-flow-ident-03.txt
Abstract
This memo discusses the desired capabilities for MPLS flow identification. The key application that needs this is in-band performance monitoring of user data packets.
Authors
Stewart Bryant
(stbryant@cisco.com)
Stewart Bryant
(stewart.bryant@gmail.com)
Carlos Pignataro
(cpignata@cisco.com)
Mach Chen
(mach.chen@huawei.com)
Zhenbin Li
(lizhenbin@huawei.com)
Gregory Mirsky
(gregory.mirsky@ericsson.com)
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)