Skip to main content

Unified IPv4-in-IPv6 Softwire CPE
draft-bfmk-softwire-unified-cpe-02

Document Type Replaced Internet-Draft (softwire WG)
Expired & archived
Authors Mohamed Boucadair , Ian Farrer
Last updated 2013-03-13 (Latest revision 2013-01-17)
Replaced by draft-ietf-softwire-unified-cpe
RFC stream Internet Engineering Task Force (IETF)
Intended RFC status (None)
Formats
Additional resources Mailing list discussion
Stream WG state Adopted by a WG
Document shepherd (None)
IESG IESG state Replaced by draft-ietf-softwire-unified-cpe
Consensus boilerplate Unknown
Telechat date (None)
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

Abstract

Transporting IPv4 packets encapsulated in IPv6 is a common solution to the problem of IPv4 service continuity over IPv6-only provider networks. A number of differing functional approaches have been developed for this, each having their own specific characteristics. As these approaches share a similar functional architecture and use the same data plane mechanisms, this memo describes a specification whereby a single CPE can interwork with all of the standardized and proposed approaches to providing encapsulated IPv4 in IPv6 services.

Authors

Mohamed Boucadair
Ian Farrer

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)