Skip to main content

Routing Over Low power and Lossy networks
charter-ietf-roll-04-01

The information below is for an older proposed charter
Document Proposed charter Routing Over Low power and Lossy networks WG (roll) Snapshot
Title Routing Over Low power and Lossy networks
Last updated 2016-11-30
State Draft Charter Rechartering
WG State Active
IESG Responsible AD John Scudder
Charter edit AD Alvaro Retana
Send notices to (None)

charter-ietf-roll-04-01

Charter for ROLL Working Group

Low power and Lossy Networks (LLNs ) are made up of many embedded devices with
limited power, memory, and processing resources. They are interconnected by a
variety of links, such as IEEE 802.15.4, Bluetooth, Low Power WiFi, wired or
other low power PLC (Powerline Communication) links. LLNs are transitioning to
an end-to-end IP-based solution to avoid the problem of non-interoperable
networks interconnected by protocol translation gateways and proxies.

RFC7102 discusses ROLL specific aspects of LLNs, and RFC7228 provides additional
terminology for constrained devices.

RFC 5548, 5673, 5826, and 5876 describe the requirements for LLNs from several
application perspectives.

The Working Group has focused on routing solutions for the areas: connected
home, building, and urban sensor networks. It has developed a Framework that
takes into consideration various aspects including high reliability in the
presence of time varying loss characteristics and connectivity while permitting
low-power operation with very modest memory and CPU pressure in networks
potentially comprising a very large number (several thousands) of nodes.

The Working Group continues to focus on routing issues for LLN and to maintain,
improve and streamline the protocols developed by the working group, including
RPL and MPL. We focus only in IPV6 work.

ROLL will coordinate closely with the working groups in other areas that focus
on constrained networks and/or constrained nodes, such as 6lo (Int) and lwig
(Int) and CoRE (App). The working groups PiM (rtg), BIER (rtg) and MANET (rtg)
will be consulted when ROLL work can profit from their results. The Working
group will align with the 6man (Int) WG when needed.

Work Items are:

  • Guidance in using RFC6553, RFC6554, and IPv6-in-IPv6 encapsulation.

  • Additional protocol elements to reduce packet size and the amount of required
    routing states

  • Automatic selection of MPL forwarders to reduce message replication.

  • Data models for RPL and MPL management.

  • Multicast enhancements algorithms.

Milestones

Date Milestone
September 2018 Recharter WG or close
July 2018 Initial submission of a solution for
draft-jadhav-roll-no-path-dao-ps to IESG
November 2017 Initial submission of draft-satish-roll-aodv-rpl to IESG
November 2017 Initial submission of
draft-gundogan-roll-dis-modifications to IESG
July 2017 Initial submission of draft-bergmann-bier-ccast to IESG
July 2017 Initial submission of
draft-vanderstok-roll-mpl-forw-select to IESG
March 2017 Initial submission of draft-vanderstok-roll-mpl-yang to
IESG
March 2017 Initial submission of draft-thubert-roll-dao-projection
to IESG
November 2016 Initial Submission of the draft about when to use
RFC6553, RFC6554, and IPv6-in-IPv6 encapsulation
Draft-ietf-roll-useofrplinfo to the IESG.