Traffic Engineering Architecture and Signaling (teas)

WG Name Traffic Engineering Architecture and Signaling
Acronym teas
Area Routing Area (rtg)
State Active
Charter charter-ietf-teas-02 Approved
Dependencies Document dependency graph (SVG)
Additional URLs
- Wiki
- Issue tracker
Personnel Chairs Lou Berger
Vishnu Beeram
Area Director Deborah Brungard
Tech Advisor Adrian Farrel
Secretary Matt Hartley
Mailing list Address teas@ietf.org
To subscribe https://www.ietf.org/mailman/listinfo/teas
Archive https://mailarchive.ietf.org/arch/browse/teas/
Jabber chat Room address xmpp:teas@jabber.ietf.org?join
Logs https://jabber.ietf.org/logs/teas/

Charter for Working Group

The Traffic Engineering Architecture and Signaling (TEAS)
Working Group is responsible for defining IP, MPLS and GMPLS
traffic engineering architecture and identifying required
related control-protocol functions, i.e., routing and path
computation element functions. The TEAS group is also
responsible for standardizing RSVP-TE signaling protocol
mechanisms that are not related to a specific switching
technology.

Traffic Engineering (TE) is the term used to refer to
techniques that enable operators to control how specific
traffic flows are treated within their networks. TE is
applied to packet networks via MPLS TE tunnels and LSPs, but
may also be provided by other mechanisms such as forwarding
rules similar to policy-based routing. The MPLS-TE control
plane was generalized to additionally support non-packet
technologies via GMPLS. RSVP-TE is the signaling protocol
used for both MPLS-TE and GMPLS. Centralized and logically
centralized control models are also supported, e.g., via
Abstraction and Control of Traffic Engineered Networks (ACTN)
and stateful-PCE.

The TEAS WG is responsible for:

a) Traffic-engineering architectures for generic
applicability across packet and non-packet
networks. This includes, for example, networks that
perform centralized computation and control, distributed
computation and control, or even a hybrid approach.

b) Definition of protocol-independent metrics and
parameters (measurement and/or service attributes) for
describing links and tunnels/paths required for traffic
engineering (and related routing, signaling and path
computation). These will be developed in conjunction
with requests and requirements from other WGs to ensure
overall usefulness.

c) Functional specification of extensions for routing
(OSPF, ISIS) and for path computation (PCEP), including
those that provide general enablers of
traffic-engineering systems that may also use
RSVP-TE. Protocol formats and procedures that embody
these extensions will be done in coordination with the
WGs supervising those protocols.

d) Functional specification of generic (i.e., not data
plane technology-specific) extensions for RSVP-TE, and
the associated protocol formats and procedures that
embody these extensions.

e) Definition of control plane mechanisms and extensions to
allow the setup and maintenance of TE paths and TE
tunnels that span multiple domains and/or switching
technologies, where a domain may be an IGP area, an
Autonomous System, or any other region of topological
visibility.

f) Definition and extension of management and security
techniques for TE path and tunnel control. This
includes configuring and monitoring RSVP-TE as well as
mechanisms used to configure, control, and report OAM
within TE networks. YANG and MIB modules may be
considered.

The TEAS working group is chartered to deliver the following:

1. Definition of additional abstract service, link, and
path properties such as jitter, delay, and
diversity. Extensions to IGPs to advertise these
properties, and extensions to RSVP-TE to request and to
accumulate these properties. Work with PCE WG to include
these properties in computation requests.

2. Specification of terminology, architecture, and protocol
requirements for abstraction and distribution of TE
information between interconnected TE domains/layers.

3. Specification and protocol extensions for a GMPLS
External Network-to-Network Interface (E-NNI), i.e.,
multi-domain GMPLS support.

4. Protocol mechanisms to signal associated LSPs in
particular with different source nodes.

5. Requirements and protocol extensions for additional
protection mechanisms including, for example, end-point
protection, protection of P2MP LSPs, and inter-domain
protection.

6. YANG models in support of Traffic Engineering, in
coordination with working groups working on YANG models
for network topology and for technology-specific network
attributes.

Requirements may be documented in stand-alone RFCs, may be
folded into architecture or solutions RFCs, may be recorded
on a wiki, or may be documented in an Internet-Draft that is
not progressed to RFC.

The TEAS WG will coordinate with the following working
groups:

- With the MPLS WG to maintain and extend MPLS-TE protocol
mechanisms and to determine whether they should be
generalized.

- With the CCAMP WG to maintain and extend non-packet, data
plane technology-specific TE protocol mechanisms and to
determine whether they should be generalized.

- With the LSR (OSPF and ISIS) WG to maintain or extend TE
routing mechanisms.

- With the PCE WG on uses of a PCE in the
traffic-engineering architecture, on PCE extensions per
the above, and on RSVP-TE extensions to support PCE WG
identified requirements.

- With the IDR WG on the use of BGP-LS in TE environments.

- With the DetNet WG on mechanisms (YANG models and
protocols) to support DetNets.

- With the SPRING WG on TE architecture and, where
appropriate, TE-related protocol extensions.

- With the SFC WG on mechanisms (YANG models and protocols) to
support SFCs

In doing this work, the WG will cooperate with external SDOs
(such as the ITU-T and the IEEE 802.1) as necessary.

Milestones

Date Milestone
Jan 2020 Submit SF Aware TE Topology YANG Model to IESG for publication
Dec 2019 Submit RMR specific RSVP document(s) to IESG for publication
Dec 2019 Submit ACTN YANG Models to IESG for publication
Nov 2019 Submit PCECC and Native IP documents to IESG for publication
Nov 2019 Submit TE Yang Models informational document to IESG for publication
Oct 2019 Submit SR&L3 TE Topology Yang Models to IESG for publication
Sep 2019 Submit RSVP(-TE) Yang Models to (base and MPLS) IESG for publication
Apr 2019 Submit TE LSP Yang Models to IESG for publication
Apr 2019 Submit metric recording to IESG for publication
draft-ietf-teas-te-metric-recording
Dec 2018 Revisit WG status (close if no milestones/deliverables)