Path Layer UDP Substrate Specification
draft-trammell-plus-spec-01
Document | Type |
Expired Internet-Draft
(individual)
Expired & archived
|
|
---|---|---|---|
Authors | Brian Trammell , Mirja Kühlewind | ||
Last updated | 2017-09-14 (Latest revision 2017-03-13) | ||
RFC stream | (None) | ||
Intended RFC status | (None) | ||
Formats | |||
Stream | Stream state | (No stream defined) | |
Consensus boilerplate | Unknown | ||
RFC Editor Note | (None) | ||
IESG | IESG state | Expired | |
Telechat date | (None) | ||
Responsible AD | (None) | ||
Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document specifies a common Path Layer UDP Substrate (PLUS) wire image for encrypted transport protocols carried over UDP. The base PLUS header carries information for driving a minimal state machine at middleboxes described in [I-D.trammell-plus-statefulness], and provides optional exposure of additional information to devices along the path using the mechanism described in [I-D.trammell-plus-abstract-mech].
Authors
Brian Trammell
Mirja Kühlewind
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)