LoWPAN simple fragment Recovery
draft-thubert-lowpan-simple-fragment-recovery-00
| Document | Type |
Expired Internet-Draft
(individual)
Expired & archived
|
|
|---|---|---|---|
| Author | Pascal Thubert | ||
| Last updated | 2008-02-07 | ||
| RFC stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Expired | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
Considering that 6LoWPAN packets can be as large as 2K bytes and that an 802.15.4 frame with security will carry in the order of 80 bytes of effective payload, a packet might end up fragmented into as many as 25 fragments at the 6LoWPAN shim layer. If a single one of those fragments is lost in transmission, all fragments must be resent, further contributing to the congestion that might have caused the initial packet loss. This draft introduces a simple protocol to recover individual fragments between 6LoWPAN endpoints.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)