Signaling MSD (Maximum SID Depth) using IS-IS
draft-tantsura-isis-segment-routing-msd-02
Document | Type |
Replaced Internet-Draft
(isis WG)
Expired & archived
|
|
---|---|---|---|
Authors | Jeff Tantsura , Uma Chunduri | ||
Last updated | 2016-11-14 (Latest revision 2016-09-26) | ||
Replaced by | draft-ietf-isis-segment-routing-msd | ||
RFC stream | Internet Engineering Task Force (IETF) | ||
Intended RFC status | (None) | ||
Formats | |||
Additional resources | Mailing list discussion | ||
Stream | WG state | Adopted by a WG | |
Document shepherd | (None) | ||
IESG | IESG state | Replaced by draft-ietf-isis-segment-routing-msd | |
Consensus boilerplate | Unknown | ||
Telechat date | (None) | ||
Responsible AD | (None) | ||
Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document proposes a way to expose Maximum SID Depth (MSD) supported by a node at node and/or link level by an ISIS Router. In a Segment Routing (SR) enabled network a centralized controller that programs SR tunnels at the head-end node needs to know the MSD information at node level and/or link level to push the label stack of an appropriate depth.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)