Minimum Requirements for IPv6-only Customer Edge Routers
draft-palet-v6ops-rfc7084-bis2-00
Document | Type |
Expired Internet-Draft
(individual)
Expired & archived
|
|
---|---|---|---|
Author | Jordi Palet Martinez | ||
Last updated | 2017-12-13 (Latest revision 2017-06-11) | ||
RFC stream | (None) | ||
Intended RFC status | (None) | ||
Formats | |||
Stream | Stream state | (No stream defined) | |
Consensus boilerplate | Unknown | ||
RFC Editor Note | (None) | ||
IESG | IESG state | Expired | |
Telechat date | (None) | ||
Responsible AD | (None) | ||
Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document specifies minimum requirements for an IPv6-only Customer Edge (CE) router. Specifically, the current version of this document focuses on the basic provisioning of an IPv6-only CE router and the provisioning of IPv6 hosts attached to it. Neither the provisioning of IPv4 nor downstream routers are in the scope of this document. The document obsoletes RFC 7084.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)