Skip to main content

Design Guidelines for IPv6 Networks
draft-matthews-v6ops-design-guidelines-01

Document Type Replaced Internet-Draft (individual)
Expired & archived
Author Philip Matthews
Last updated 2013-02-19 (Latest revision 2012-10-22)
Replaced by draft-ietf-v6ops-design-choices
RFC stream (None)
Intended RFC status (None)
Formats
Stream Stream state (No stream defined)
Consensus boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Replaced by draft-ietf-v6ops-design-choices
Telechat date (None)
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

Abstract

This document presents advice on the design choices that arise when designing IPv6 networks (both dual-stack and IPv6-only). The intended audience is someone designing an IPv6 network who is knowledgeable about best current practices around IPv4 network design, and wishes to learn the corresponding practices for IPv6.

Authors

Philip Matthews

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)