Skip to main content

Resource ReserVation Protocol-Traffic Engineering (RSVP-TE) extension for recording TE Metric of a Label Switched Path
draft-ietf-teas-te-metric-recording-06

The information below is for an old version of the document.
Document Type
This is an older version of an Internet-Draft whose latest revision state is "Expired".
Expired & archived
Authors Zafar Ali , George Swallow , Clarence Filsfils , Matt Hartley , Kenji Kumaki , Ruediger Kunze
Last updated 2018-05-17 (Latest revision 2017-11-13)
Replaces draft-ietf-ccamp-te-metric-recording
RFC stream Internet Engineering Task Force (IETF)
Formats
Additional resources Mailing list discussion
Stream WG state WG Document
Document shepherd Vishnu Pavan Beeram
IESG IESG state Expired
Consensus boilerplate Unknown
Telechat date (None)
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

Abstract

There are many scenarios in which Traffic Engineering (TE) metrics such as cost, delay and delay variation associated with the TE link formed by Label Switched Path (LSP) are not available to the ingress and egress nodes. This draft provides extensions for the Resource ReserVation Protocol- Traffic Engineering (RSVP-TE) to support automatic collection of cost, delay and delay variation information for the TE link formed by a LSP.

Authors

Zafar Ali
George Swallow
Clarence Filsfils
Matt Hartley
Kenji Kumaki
Ruediger Kunze

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)