Skip to main content

Assertion Framework for OAuth 2.0 Client Authentication and Authorization Grants
draft-ietf-oauth-assertions-17

The information below is for an old version of the document.
Document Type
This is an older version of an Internet-Draft that was ultimately published as RFC 7521.
Authors Brian Campbell , Chuck Mortimore , Michael B. Jones , Yaron Y. Goland
Last updated 2014-10-16 (Latest revision 2014-07-23)
RFC stream Internet Engineering Task Force (IETF)
Formats
Reviews
Additional resources Mailing list discussion
Stream WG state Submitted to IESG for Publication
Document shepherd Hannes Tschofenig
Shepherd write-up Show Last changed 2014-05-08
IESG IESG state Became RFC 7521 (Proposed Standard)
Consensus boilerplate Yes
Telechat date (None)
Needs a YES. Needs 10 more YES or NO OBJECTION positions to pass.
Responsible AD Kathleen Moriarty
IESG note ** No value found for 'doc.notedoc.note' **
Send notices to oauth-chairs@tools.ietf.org, draft-ietf-oauth-assertions@tools.ietf.org, oauth@ietf.org
IANA IANA review state IANA - Not OK
draft-ietf-oauth-assertions-17
OAuth Working Group                                          B. Campbell
Internet-Draft                                             Ping Identity
Intended status: Standards Track                            C. Mortimore
Expires: January 24, 2015                                     Salesforce
                                                                M. Jones
                                                               Y. Goland
                                                               Microsoft
                                                           July 23, 2014

      Assertion Framework for OAuth 2.0 Client Authentication and
                          Authorization Grants
                     draft-ietf-oauth-assertions-17

Abstract

   This specification provides a framework for the use of assertions
   with OAuth 2.0 in the form of a new client authentication mechanism
   and a new authorization grant type.  Mechanisms are specified for
   transporting assertions during interactions with a token endpoint, as
   well as general processing rules.

   The intent of this specification is to provide a common framework for
   OAuth 2.0 to interwork with other identity systems using assertions,
   and to provide alternative client authentication mechanisms.

   Note that this specification only defines abstract message flows and
   processing rules.  In order to be implementable, companion
   specifications are necessary to provide the corresponding concrete
   instantiations.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on January 24, 2015.

Campbell, et al.        Expires January 24, 2015                [Page 1]
Internet-Draft          OAuth Assertion Framework              July 2014

Copyright Notice

   Copyright (c) 2014 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   3
   2.  Notational Conventions  . . . . . . . . . . . . . . . . . . .   4
   3.  Framework . . . . . . . . . . . . . . . . . . . . . . . . . .   4
   4.  Transporting Assertions . . . . . . . . . . . . . . . . . . .   7
     4.1.  Using Assertions as Authorization Grants  . . . . . . . .   7
       4.1.1.  Error Responses . . . . . . . . . . . . . . . . . . .   8
     4.2.  Using Assertions for Client Authentication  . . . . . . .   8
       4.2.1.  Error Responses . . . . . . . . . . . . . . . . . . .   9
   5.  Assertion Content and Processing  . . . . . . . . . . . . . .  10
     5.1.  Assertion Metamodel . . . . . . . . . . . . . . . . . . .  10
     5.2.  General Assertion Format and Processing Rules . . . . . .  11
   6.  Common Scenarios  . . . . . . . . . . . . . . . . . . . . . .  12
     6.1.  Client Authentication . . . . . . . . . . . . . . . . . .  12
     6.2.  Client Acting on Behalf of Itself . . . . . . . . . . . .  13
     6.3.  Client Acting on Behalf of a User . . . . . . . . . . . .  13
       6.3.1.  Client Acting on Behalf of an Anonymous User  . . . .  13
   7.  Interoperability Considerations . . . . . . . . . . . . . . .  14
   8.  Security Considerations . . . . . . . . . . . . . . . . . . .  15
     8.1.  Forged Assertion  . . . . . . . . . . . . . . . . . . . .  15
     8.2.  Stolen Assertion  . . . . . . . . . . . . . . . . . . . .  15
     8.3.  Unauthorized Disclosure of Personal Information . . . . .  16
     8.4.  Privacy Considerations  . . . . . . . . . . . . . . . . .  17
   9.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .  17
     9.1.  assertion Parameter Registration  . . . . . . . . . . . .  17
     9.2.  client_assertion Parameter Registration . . . . . . . . .  17
     9.3.  client_assertion_type Parameter Registration  . . . . . .  18
   10. References  . . . . . . . . . . . . . . . . . . . . . . . . .  18
     10.1.  Normative References . . . . . . . . . . . . . . . . . .  18
     10.2.  Informative References . . . . . . . . . . . . . . . . .  18
   Appendix A.  Acknowledgements . . . . . . . . . . . . . . . . . .  19
   Appendix B.  Document History . . . . . . . . . . . . . . . . . .  19

Campbell, et al.        Expires January 24, 2015                [Page 2]
Internet-Draft          OAuth Assertion Framework              July 2014

   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  23

1.  Introduction

   An assertion is a package of information that facilitates the sharing
   of identity and security information across security domains.
   Section 3 provides a more detailed description of the concept of an
   assertion for the purpose of this specification.

   OAuth 2.0 [RFC6749] is an authorization framework that enables a
   third-party application to obtain limited access to a protected HTTP
   resource.  In OAuth, those third-party applications are called
   clients; they access protected resources by presenting an access
   token to the HTTP resource.  Access tokens are issued to clients by
   an authorization server with the (sometimes implicit) approval of the
   resource owner.  These access tokens are typically obtained by
   exchanging an authorization grant, which represents the authorization
   granted by the resource owner (or by a privileged administrator).
   Several authorization grant types are defined to support a wide range
   of client types and user experiences.  OAuth also provides an
   extensibility mechanism for defining additional grant types, which
   can serve as a bridge between OAuth and other protocol frameworks.

   This specification provides a general framework for the use of
   assertions as authorization grants with OAuth 2.0.  It also provides
   a framework for assertions to be used for client authentication.  It
   provides generic mechanisms for transporting assertions during
   interactions with an authorization server's token endpoint, as well
   as general rules for the content and processing of those assertions.
   The intent is to provide an alternative client authentication
   mechanism (one that doesn't send client secrets), as well as to
   facilitate the use of OAuth 2.0 in client-server integration
   scenarios, where the end-user may not be present.

   This specification only defines abstract message flows and processing
   rules.  In order to be implementable, companion specifications are
   necessary to provide the corresponding concrete instantiations.  For
   instance, SAML 2.0 Profile for OAuth 2.0 Client Authentication and
   Authorization Grants [I-D.ietf-oauth-saml2-bearer] defines a concrete
   instantiation for SAML 2.0 assertions and JSON Web Token (JWT)
   Profile for OAuth 2.0 Client Authentication and Authorization Grants
   [I-D.ietf-oauth-jwt-bearer] defines a concrete instantiation for
   JWTs.

   Note: The use of assertions for client authentication is orthogonal
   to and separable from using assertions as an authorization grant.
   They can be used either in combination or separately.  Client
   assertion authentication is nothing more than an alternative way for

Campbell, et al.        Expires January 24, 2015                [Page 3]
Internet-Draft          OAuth Assertion Framework              July 2014

   a client to authenticate to the token endpoint and must be used in
   conjunction with some grant type to form a complete and meaningful
   protocol request.  Assertion authorization grants may be used with or
   without client authentication or identification.  Whether or not
   client authentication is needed in conjunction with an assertion
   authorization grant, as well as the supported types of client
   authentication, are policy decisions at the discretion of the
   authorization server.

2.  Notational Conventions

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119] .

   Throughout this document, values are quoted to indicate that they are
   to be taken literally.  When using these values in protocol messages,
   the quotes must not be used as part of the value.

3.  Framework

   An assertion is a package of information that allows identity and
   security information to be shared across security domains.  An
   assertion typically contains information about a subject or
   principal, information about the party that issued the assertion and
   when was it issued, as well as the conditions under which the
   assertion is to be considered valid, such as when and where it can be
   used.

   The entity that creates and signs or integrity protects the assertion
   is typically known as the "Issuer" and the entity that consumes the
   assertion and relies on its information is typically known as the
   "Relying Party".  In the context of this document, the authorization
   server acts as a relying party.

   Assertions used in the protocol exchanges defined by this
   specification MUST always be protected against tampering using a
   digital signature or a keyed message digest applied by the issuer.
   An assertion MAY additionally be encrypted, preventing unauthorized
   parties from inspecting the content.

   Although this document does not define the processes by which the
   client obtains the assertion (prior to sending it to the
   authorization server), there are two common patterns described below.

   In the first pattern, depicted in Figure 1, the client obtains an
   assertion from a third party entity capable of issuing, renewing,
   transforming, and validating security tokens.  Typically such an

Campbell, et al.        Expires January 24, 2015                [Page 4]
Internet-Draft          OAuth Assertion Framework              July 2014

   entity is known as a "Security Token Service" (STS) or just "Token
   Service" and a trust relationship (usually manifested in the exchange
   of some kind of key material) exists between the token service and
   the relying party.  The token service is the assertion issuer; its
   role is to fulfill requests from clients, which present various
   credentials, and mint assertions as requested, fill them with
   appropriate information, and integrity protect them with a signature
   or message authentication code.  WS-Trust [OASIS.WS-Trust] is one
   available standard for requesting security tokens (assertions).

     Relying
     Party                     Client                   Token Service
       |                          |                         |
       |                          |  1) Request Assertion   |
       |                          |------------------------>|
       |                          |                         |
       |                          |  2) Assertion           |
       |                          |<------------------------|
       |    3) Assertion          |                         |
       |<-------------------------|                         |
       |                          |                         |
       |    4) OK or Failure      |                         |
       |------------------------->|                         |
       |                          |                         |
       |                          |                         |

                  Figure 1: Third Party Created Assertion

   In the second pattern, depicted in Figure 2, the client creates
   assertions locally.  To apply the signatures or message
   authentication codes to assertions, it has to obtain key material:
   either symmetric keys or asymmetric key pairs.  The mechanisms for
   obtaining this key material are beyond the scope of this
   specification.

   Although assertions are usually used to convey identity and security
   information, self-issued assertions can also serve a different
   purpose.  They can be used to demonstrate knowledge of some secret,
   such as a client secret, without actually communicating the secret
   directly in the transaction.  In that case, additional information
   included in the assertion by the client itself will be of limited
   value to the relying party and, for this reason, only a bare minimum
   of information is typically included in such an assertion, such as
   information about issuing and usage conditions.

Campbell, et al.        Expires January 24, 2015                [Page 5]
Internet-Draft          OAuth Assertion Framework              July 2014

     Relying
     Party                     Client
       |                          |
       |                          | 1) Create
       |                          |    Assertion
       |                          |--------------+
       |                          |              |
       |                          | 2) Assertion |
       |                          |<-------------+
       |    3) Assertion          |
       |<-------------------------|
       |                          |
       |    4) OK or Failure      |
       |------------------------->|
       |                          |
       |                          |

                      Figure 2: Self-Issued Assertion

   Deployments need to determine the appropriate variant to use based on
   the required level of security, the trust relationship between the
   entities, and other factors.

   From the perspective of what must be done by the entity presenting
   the assertion, there are two general types of assertions:

   1.  Bearer Assertions: Any entity in possession of a bearer assertion
       (the bearer) can use it to get access to the associated resources
       (without demonstrating possession of a cryptographic key).  To
       prevent misuse, bearer assertions need to be protected from
       disclosure in storage and in transport.  Secure communication
       channels are required between all entities to avoid leaking the
       assertion to unauthorized parties.

   2.  Holder-of-Key Assertions: To access the associated resources, the
       entity presenting the assertion must demonstrate possession of
       additional cryptographic material.  The token service thereby
       binds a key identifier to the assertion and the client has to
       demonstrate to the relying party that it knows the key
       corresponding to that identifier when presenting the assertion.
       This mechanism provides additional security properties.

   The protocol parameters and processing rules defined in this document
   are intended to support a client presenting a bearer assertion to an
   authorization server.  The use of holder-of-key assertions are not
   precluded by this document, but additional protocol details would
   need to be specified.

Campbell, et al.        Expires January 24, 2015                [Page 6]
Internet-Draft          OAuth Assertion Framework              July 2014

4.  Transporting Assertions

   This section defines HTTP parameters for transporting assertions
   during interactions with a token endpoint of an OAuth authorization
   server.  Because requests to the token endpoint result in the
   transmission of clear-text credentials (in both the HTTP request and
   response), all requests to the token endpoint MUST use TLS, as
   mandated in Section 3.2 of OAuth 2.0 [RFC6749].

4.1.  Using Assertions as Authorization Grants

   This section defines the use of assertions as authorization grants,
   based on the definition provided in Section 4.5 of OAuth 2.0
   [RFC6749].  When using assertions as authorization grants, the client
   includes the assertion and related information using the following
   HTTP request parameters:

   grant_type
      REQUIRED.  The format of the assertion as defined by the
      authorization server.  The value MUST be an absolute URI.

   assertion
      REQUIRED.  The assertion being used as an authorization grant.
      Specific serialization of the assertion is defined by profile
      documents.  The serialization MUST be encoded for transport within
      HTTP forms.  It is RECOMMENDED that base64url be used.

   scope
      OPTIONAL.  The requested scope as described in Section 3.3 of
      OAuth 2.0 [RFC6749].  When exchanging assertions for access
      tokens, the authorization for the token has been previously
      granted through some out-of-band mechanism.  As such, the
      requested scope MUST be equal or lesser than the scope originally
      granted to the authorized accessor.  If the scope parameter and/or
      value are omitted, the scope MUST be treated as equal to the scope
      originally granted to the authorized accessor.  The Authorization
      Server MUST limit the scope of the issued access token to be equal
      or lesser than the scope originally granted to the authorized
      accessor.

   Authentication of the client is optional, as described in
   Section 3.2.1 of OAuth 2.0 [RFC6749] and consequently, the
   "client_id" is only needed when a form of client authentication that
   relies on the parameter is used.

   The following non-normative example demonstrates an assertion being
   used as an authorization grant (with extra line breaks for display
   purposes only):

Campbell, et al.        Expires January 24, 2015                [Page 7]
Internet-Draft          OAuth Assertion Framework              July 2014

     POST /token HTTP/1.1
     Host: server.example.com
     Content-Type: application/x-www-form-urlencoded

     grant_type=urn%3Aietf%3Aparams%3Aoauth%3Agrant-type%3Asaml2-bearer&
     assertion=PHNhbWxwOl...[omitted for brevity]...ZT4

   An assertion used in this context is generally a short lived
   representation of the authorization grant and authorization servers
   SHOULD NOT issue access tokens with a lifetime that exceeds the
   validity period of the assertion by a significant period.  In
   practice, that will usually mean that refresh tokens are not issued
   in response to assertion grant requests and access tokens will be
   issued with a reasonably short lifetime.  Clients can refresh an
   expired access token by requesting a new one using the same
   assertion, if it is still valid, or with a new assertion.

   An IETF URN for use as the "grant_type" value can be requested using
   the template in [RFC6755].  A URN of the form
   urn:ietf:params:oauth:grant-type:* is suggested.

4.1.1.  Error Responses

   If an assertion is not valid or has expired, the Authorization Server
   MUST construct an error response as defined in OAuth 2.0 [RFC6749].
   The value of the "error" parameter MUST be the "invalid_grant" error
   code.  The authorization server MAY include additional information
   regarding the reasons the assertion was considered invalid using the
   "error_description" or "error_uri" parameters.

   For example:

     HTTP/1.1 400 Bad Request
     Content-Type: application/json
     Cache-Control: no-store

     {
       "error":"invalid_grant",
       "error_description":"Audience validation failed"
     }

4.2.  Using Assertions for Client Authentication

   The following section defines the use of assertions as client
   credentials as an extension of Section 2.3 of OAuth 2.0 [RFC6749].
   When using assertions as client credentials, the client includes the
   assertion and related information using the following HTTP request
   parameters:

Campbell, et al.        Expires January 24, 2015                [Page 8]
Internet-Draft          OAuth Assertion Framework              July 2014

   client_assertion_type
      REQUIRED.  The format of the assertion as defined by the
      authorization server.  The value MUST be an absolute URI.

   client_assertion
      REQUIRED.  The assertion being used to authenticate the client.
      Specific serialization of the assertion is defined by profile
      documents.  The serialization MUST be encoded for transport within
      HTTP forms.  It is RECOMMENDED that base64url be used.

   client_id
      OPTIONAL.  The client identifier as described in Section 2.2 of
      OAuth 2.0 [RFC6749].  The "client_id" is unnecessary for client
      assertion authentication because the client is identified by the
      subject of the assertion.  If present, the value of the
      "client_id" parameter MUST identify the same client as is
      identified by the client assertion.

   The following non-normative example demonstrates a client
   authenticating using an assertion during an Access Token Request, as
   defined in Section 4.1.3 of OAuth 2.0 [RFC6749] (with extra line
   breaks for display purposes only):

     POST /token HTTP/1.1
     Host: server.example.com
     Content-Type: application/x-www-form-urlencoded

     grant_type=authorization_code&
     code=i1WsRn1uB1&
     client_assertion_type=urn%3Aietf%3Aparams%3Aoauth
     %3Aclient-assertion-type%3Asaml2-bearer&
     client_assertion=PHNhbW...[omitted for brevity]...ZT

   Token endpoints can differentiate between assertion based credentials
   and other client credential types by looking for the presence of the
   "client_assertion" and "client_assertion_type" parameters, which will
   only be present when using assertions for client authentication.

   An IETF URN for use as the "client_assertion_type" value may be
   requested using the template in [RFC6755].  A URN of the form
   urn:ietf:params:oauth:client-assertion-type:* is suggested.

4.2.1.  Error Responses

   If an assertion is invalid for any reason or if more than one client
   authentication mechanism is used, the Authorization Server MUST
   construct an error response as defined in OAuth 2.0 [RFC6749].  The
   value of the "error" parameter MUST be the "invalid_client" error

Campbell, et al.        Expires January 24, 2015                [Page 9]
Internet-Draft          OAuth Assertion Framework              July 2014

   code.  The authorization server MAY include additional information
   regarding the reasons the client assertion was considered invalid
   using the "error_description" or "error_uri" parameters.

   For example:

     HTTP/1.1 400 Bad Request
     Content-Type: application/json
     Cache-Control: no-store

     {
       "error":"invalid_client"
       "error_description":"assertion has expired"
     }

5.  Assertion Content and Processing

   This section provides a general content and processing model for the
   use of assertions in OAuth 2.0 [RFC6749].

5.1.  Assertion Metamodel

   The following are entities and metadata involved in the issuance,
   exchange, and processing of assertions in OAuth 2.0.  These are
   general terms, abstract from any particular assertion format.
   Mappings of these terms into specific representations are provided by
   profiles of this specification.

   Issuer
      A unique identifier for the entity that issued the assertion.
      Generally this is the entity that holds the key material used to
      sign or integrity protect the assertion.  Examples of issuers are
      OAuth clients (when assertions are self-issued) and third party
      security token services.  If the assertion is self-issued, the
      Issuer value is the client identifier.  If the assertion was
      issued by a Security Token Service (STS), the Issuer should
      identify the STS in a manner recognized by the Authorization
      Server.  In the absence of an application profile specifying
      otherwise, compliant applications MUST compare Issuer values using
      the Simple String Comparison method defined in Section 6.2.1 of
      RFC 3986 [RFC3986].

   Subject
      A unique identifier for the principal that is the subject of the
      assertion.

Campbell, et al.        Expires January 24, 2015               [Page 10]
Internet-Draft          OAuth Assertion Framework              July 2014

      *  When using assertions for client authentication, the Subject
         identifies the client to the authorization server using the
         value of the "client_id" of the OAuth client.

      *  When using assertions as an authorization grant, the Subject
         identifies an authorized accessor for which the access token is
         being requested (typically the resource owner, or an authorized
         delegate).

   Audience
      A value that identifies the party or parties intended to process
      the assertion.  The URL of the Token Endpoint, as defined in
      Section 3.2 of OAuth 2.0 [RFC6749], can be used to indicate that
      the authorization server as a valid intended audience of the
      assertion.  In the absence of an application profile specifying
      otherwise, compliant applications MUST compare the audience values
      using the Simple String Comparison method defined in Section 6.2.1
      of RFC 3986 [RFC3986].

   Issued At
      The time at which the assertion was issued.  While the
      serialization may differ by assertion format, it is REQUIRED that
      the time be expressed in UTC with no time zone component.

   Expires At
      The time at which the assertion expires.  While the serialization
      may differ by assertion format, it is REQUIRED that the time be
      expressed in UTC with no time zone component.

   Assertion ID
      A nonce or unique identifier for the assertion.  The Assertion ID
      may be used by implementations requiring message de-duplication
      for one-time use assertions.  Any entity that assigns an
      identifier MUST ensure that there is negligible probability that
      that entity or any other entity will accidentally assign the same
      identifier to a different data object.

5.2.  General Assertion Format and Processing Rules

   The following are general format and processing rules for the use of
   assertions in OAuth:

   o  The assertion MUST contain an Issuer.  The Issuer MUST identify
      the entity that issued the assertion as recognized by the
      Authorization Server.  If an assertion is self-issued, the Issuer
      MUST be the value of the client's "client_id".

Campbell, et al.        Expires January 24, 2015               [Page 11]
Internet-Draft          OAuth Assertion Framework              July 2014

   o  The assertion MUST contain a Subject.  The Subject typically
      identifies an authorized accessor for which the access token is
      being requested (i.e., the resource owner or an authorized
      delegate), but in some cases, may be a pseudonymous identifier or
      other value denoting an anonymous user.  When the client is acting
      on behalf of itself, the Subject MUST be the value of the client's
      "client_id".

   o  The assertion MUST contain an Audience that identifies the
      Authorization Server as the intended audience.  Assertions that do
      not identify the Authorization Server as an intended audience MUST
      be rejected.

   o  The assertion MUST contain an Expires At entity that limits the
      time window during which the assertion can be used.  The
      authorization server MUST reject assertions that have expired
      (subject to allowable clock skew between systems).  The
      authorization server MAY reject assertions with an Expires At
      attribute value that is unreasonably far in the future.

   o  The assertion MAY contain an Issued At entity containing the UTC
      time at which the assertion was issued.

   o  The Authorization Server MUST reject assertions with an invalid
      signature or keyed message digest.  The algorithm used to validate
      the signature or message authentication code and the mechanism for
      designating the secret used to generate the signature or message
      authentication code over the assertion are beyond the scope of
      this specification.

6.  Common Scenarios

   The following provides additional guidance, beyond the format and
   processing rules defined in Section 4 and Section 5, on assertion use
   for a number of common use cases.

6.1.  Client Authentication

   A client uses an assertion to authenticate to the authorization
   server's token endpoint by using the "client_assertion_type" and
   "client_assertion" parameters as defined in Section 4.2.  The Subject
   of the assertion identifies the client.  If the assertion is self-
   issued by the client, the Issuer of the assertion also identifies the
   client.

   The example in Section 4.2 that shows a client authenticating using
   an assertion during an Access Token Request.

Campbell, et al.        Expires January 24, 2015               [Page 12]
Internet-Draft          OAuth Assertion Framework              July 2014

6.2.  Client Acting on Behalf of Itself

   When a client is accessing resources on behalf of itself, it does so
   in a manner analogous to the Client Credentials Grant defined in
   Section 4.4 of OAuth 2.0 [RFC6749].  This is a special case that
   combines both the authentication and authorization grant usage
   patterns.  In this case, the interactions with the authorization
   server should be treated as using an assertion for Client
   Authentication according to Section 4.2, while using the grant_type
   parameter with the value "client_credentials" to indicate that the
   client is requesting an access token using only its client
   credentials.

   The following non-normative example demonstrates an assertion being
   used for a Client Credentials Access Token Request, as defined in
   Section 4.4.2 of OAuth 2.0 [RFC6749] (with extra line breaks for
   display purposes only):

     POST /token HTTP/1.1
     Host: server.example.com
     Content-Type: application/x-www-form-urlencoded

     grant_type=client_credentials&
     client_assertion_type=urn%3Aietf%3Aparams%3Aoauth
     %3Aclient-assertion-type%3Asaml2-bearer&
     client_assertion=PHNhbW...[omitted for brevity]...ZT

6.3.  Client Acting on Behalf of a User

   When a client is accessing resources on behalf of a user, it does so
   by using the "grant_type" and "assertion" parameters as defined in
   Section 4.1.  The Subject identifies an authorized accessor for which
   the access token is being requested (typically the resource owner, or
   an authorized delegate).

   The example in Section 4.1 that shows a client making an Access Token
   Request using an assertion as an Authorization Grant.

6.3.1.  Client Acting on Behalf of an Anonymous User

   When a client is accessing resources on behalf of an anonymous user,
   a mutually agreed upon Subject identifier indicating anonymity is
   used.  The Subject value might be an opaque persistent or transient
   pseudonymous identifier for the user or be an agreed upon static
   value indicating an anonymous user (e.g., "anonymous").  The
   authorization may be based upon additional criteria, such as
   additional attributes or claims provided in the assertion.  For
   example, a client might present an assertion from a trusted issuer

Campbell, et al.        Expires January 24, 2015               [Page 13]
Internet-Draft          OAuth Assertion Framework              July 2014

   asserting that the bearer is over 18 via an included claim.  In this
   case, no additional information about the user's identity is
   included, yet all the data needed to issue an access token is
   present.

   More information about anonymity, pseudonymity, and privacy
   considerations in general can be found in [RFC6973].

7.  Interoperability Considerations

   This specification defines a framework for using assertions with
   OAuth 2.0.  However, as an abstract framework in which the data
   formats used for representing many values are not defined, on its
   own, this specification is not sufficient to produce interoperable
   implementations.

   Two other specifications that profile this framework for specific
   assertion have been developed: one [I-D.ietf-oauth-saml2-bearer] uses
   SAML 2.0-based assertions and the other [I-D.ietf-oauth-jwt-bearer]
   uses JSON Web Tokens (JWTs).  These two instantiations of this
   framework specify additional details about the assertion encoding and
   processing rules for using those kinds of assertions with OAuth 2.0.

   However, even when profiled for specific assertion types, agreements
   between system entities regarding identifiers, keys, and endpoints
   are required in order to achieve interoperable deployments.  Specific
   items that require agreement are as follows: values for the issuer
   and audience identifiers, supported assertion and client
   authentication types, the location of the token endpoint, the key
   used to apply and verify the digital signature or keyed message
   digest over the assertion, one-time use restrictions on assertions,
   maximum assertion lifetime allowed, and the specific subject and
   attribute requirements of the assertion.  The exchange of such
   information is explicitly out of scope for this specification.
   Deployments for particular trust frameworks, circles of trust, or
   other uses cases will need to agree among the participants on the
   kinds of values to be used for some abstract fields defined by this
   specification.  In some cases, additional profiles may be created
   that constrain or prescribe these values or specify how they are to
   be exchanged.  The OAuth 2.0 Dynamic Client Registration Core
   Protocol [I-D.ietf-oauth-dyn-reg] is one such profile that enables
   OAuth Clients to register metadata about themselves at an
   Authorization Server.

Campbell, et al.        Expires January 24, 2015               [Page 14]
Internet-Draft          OAuth Assertion Framework              July 2014

8.  Security Considerations

   This section discusses security considerations that apply when using
   assertions with OAuth 2.0 as described in this document.  As
   discussed in Section 3, there are two different ways to obtain
   assertions: either as self-issued or obtained from a third party
   token service.  While the actual interactions for obtaining an
   assertion are outside the scope of this document, the details are
   important from a security perspective.  Section 3 discusses the high
   level architectural aspects.  Many of the security considerations
   discussed in this section are applicable to both the OAuth exchange
   as well as the client obtaining the assertion.

   The remainder of this section focuses on the exchanges that concern
   presenting an assertion for client authentication and for the
   authorization grant.

8.1.  Forged Assertion

   Threat:
      An adversary could forge or alter an assertion in order to obtain
      an access token (in case of the authorization grant) or to
      impersonate a client (in case of the client authentication
      mechanism).

   Countermeasures:
      To avoid this kind of attack, the entities must assure that proper
      mechanisms for protecting the integrity of the assertion are
      employed.  This includes the issuer digitally signing the
      assertion or computing a keyed message digest over the assertion.

8.2.  Stolen Assertion

   Threat:
      An adversary may be able obtain an assertion (e.g., by
      eavesdropping) and then reuse it (replay it) at a later point in
      time.

   Countermeasures:
      The primary mitigation for this threat is the use of secure
      communication channels with server authentication for all network
      exchanges.

      An assertion may also contain several elements to prevent replay
      attacks.  There is, however, a clear tradeoff between reusing an

Campbell, et al.        Expires January 24, 2015               [Page 15]
Internet-Draft          OAuth Assertion Framework              July 2014

      assertion for multiple exchanges and obtaining and creating new
      fresh assertions.

      Authorization Servers and Resource Servers may use a combination
      of the Assertion ID and Issued At/Expires At attributes for replay
      protection.  Previously processed assertions may be rejected based
      on the Assertion ID.  The addition of the validity window relieves
      the authorization server from maintaining an infinite state table
      of processed Assertion IDs.

8.3.  Unauthorized Disclosure of Personal Information

   Threat:
      The ability for other entities to obtain information about an
      individual, such as authentication information, role in an
      organization, or other authorization relevant information, raises
      privacy concerns.

   Countermeasures:
      To address the threats, two cases need to be differentiated:

      First, a third party that did not participate in any of the
      exchange is prevented from eavesdropping on the content of the
      assertion by employing confidentiality protection of the exchange
      using TLS.  This ensures that an eavesdropper on the wire is
      unable to obtain information.  However, this does not prevent
      legitimate protocol entities from obtaining information that they
      are not allowed to possess from assertions.  Some assertion
      formats allow for the assertion to be encrypted, preventing
      unauthorized parties from inspecting the content.

      Second, an Authorization Server may obtain an assertion that was
      created by a third party token service and that token service may
      have placed attributes into the assertion.  To mitigate potential
      privacy problems, prior consent for the release of such attribute
      information from the resource owner should be obtained.  OAuth
      itself does not directly provide such capabilities, but this
      consent approval may be obtained using other identity management
      protocols, user consent interactions, or in an out-of-band
      fashion.

      For the cases where a third party token service creates assertions
      to be used for client authentication, privacy concerns are
      typically lower, since many of these clients are Web servers
      rather than individual devices operated by humans.  If the
      assertions are used for client authentication of devices or

Campbell, et al.        Expires January 24, 2015               [Page 16]
Internet-Draft          OAuth Assertion Framework              July 2014

      software that can be closely linked to end users, then privacy
      protection safeguards need to be taken into consideration.

      Further guidance on privacy friendly protocol design can be found
      in [RFC6973].

8.4.  Privacy Considerations

   An assertion may contain privacy-sensitive information and, to
   prevent disclosure of such information to unintended parties, should
   only be transmitted over encrypted channels, such as TLS.  In cases
   where it is desirable to prevent disclosure of certain information
   the client, the assertion, or portions of it, should be be encrypted
   to the authorization server.

   Deployments should determine the minimum amount of information
   necessary to complete the exchange and include only such information
   in the assertion.  In some cases, the subject identifier can be a
   value representing an anonymous or pseudonymous user, as described in
   Section 6.3.1.

9.  IANA Considerations

   This is a request to add three values, as listed in the sub-sections
   below, to the "OAuth Parameters" registry established by RFC 6749
   [RFC6749].

9.1.  assertion Parameter Registration

   o  Parameter name: assertion

   o  Parameter usage location: token request

   o  Change controller: IETF

   o  Specification document(s): [[this document]]

9.2.  client_assertion Parameter Registration

   o  Parameter name: client_assertion

   o  Parameter usage location: token request

   o  Change controller: IETF

   o  Specification document(s): [[this document]]

Campbell, et al.        Expires January 24, 2015               [Page 17]
Internet-Draft          OAuth Assertion Framework              July 2014

9.3.  client_assertion_type Parameter Registration

   o  Parameter name: client_assertion_type

   o  Parameter usage location: token request

   o  Change controller: IETF

   o  Specification document(s): [[this document]]

10.  References

10.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC3986]  Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
              Resource Identifier (URI): Generic Syntax", STD 66, RFC
              3986, January 2005.

   [RFC6749]  Hardt, D., "The OAuth 2.0 Authorization Framework", RFC
              6749, October 2012.

10.2.  Informative References

   [I-D.ietf-oauth-dyn-reg]
              Richer, J., Jones, M., Bradley, J., Machulak, M., and P.
              Hunt, "OAuth 2.0 Dynamic Client Registration Core
              Protocol", draft-ietf-oauth-dyn-reg-16 (work in progress),
              February 2014.

   [I-D.ietf-oauth-jwt-bearer]
              Jones, M., Campbell, B., and C. Mortimore, "JSON Web Token
              (JWT) Profile for OAuth 2.0 Client Authentication and
              Authorization Grants", draft-ietf-oauth-jwt-bearer (work
              in progress), July 2014.

   [I-D.ietf-oauth-saml2-bearer]
              Campbell, B., Mortimore, C., and M. Jones, "SAML 2.0
              Profile for OAuth 2.0 Client Authentication and
              Authorization Grants", draft-ietf-oauth-saml2-bearer (work
              in progress), July 2014.

   [OASIS.WS-Trust]
              Nadalin, A., Ed., Goodner, M., Ed., Gudgin, M., Ed.,
              Barbir, A., Ed., and H. Granqvist, Ed., "WS-Trust", Feb
              2009.

Campbell, et al.        Expires January 24, 2015               [Page 18]
Internet-Draft          OAuth Assertion Framework              July 2014

   [RFC6755]  Campbell, B. and H. Tschofenig, "An IETF URN Sub-Namespace
              for OAuth", RFC 6755, October 2012.

   [RFC6973]  Cooper, A., Tschofenig, H., Aboba, B., Peterson, J.,
              Morris, J., Hansen, M., and R. Smith, "Privacy
              Considerations for Internet Protocols", RFC 6973, July
              2013.

Appendix A.  Acknowledgements

   The authors wish to thank the following people that have influenced
   or contributed this specification: Paul Madsen, Eric Sachs, Jian Cai,
   Tony Nadalin, Hannes Tschofenig, the authors of the OAuth WRAP
   specification, and the members of the OAuth working group.

Appendix B.  Document History

   [[ to be removed by the RFC editor before publication as an RFC ]]

   draft-ietf-oauth-assertions-17

   o  Added Privacy Considerations section per AD review discussion
      http://www.ietf.org/mail-archive/web/oauth/current/msg13148.html
      and http://www.ietf.org/mail-archive/web/oauth/current/
      msg13144.html

   draft-ietf-oauth-assertions-16

   o  Clarified some text around the treatment of subject based on the
      rough rough consensus from the thread staring at
      http://www.ietf.org/mail-archive/web/oauth/current/msg12630.html

   draft-ietf-oauth-assertions-15

   o  Updated references.

   o  Improved formatting of hanging lists.

   draft-ietf-oauth-assertions-14

   o  Update reference: draft-iab-privacy-considerations is now RFC 6973

   o  Update reference: draft-ietf-oauth-dyn-reg from -13 to -15

   draft-ietf-oauth-assertions-13

   o  Clean up language around subject per the subject part of
      http://www.ietf.org/mail-archive/web/oauth/current/msg12155.html

Campbell, et al.        Expires January 24, 2015               [Page 19]
Internet-Draft          OAuth Assertion Framework              July 2014

   o  Replace "Client Credentials flow" by "Client Credentials _Grant_"
      as suggested in http://www.ietf.org/mail-
      archive/web/oauth/current/msg12155.html

   o  For consistency with SAML and JWT per http://www.ietf.org/mail-
      archive/web/oauth/current/msg12251.html and http://www.ietf.org/
      mail-archive/web/oauth/current/msg12253.html Stated that "In the
      absence of an application profile specifying otherwise, compliant
      applications MUST compare the audience values using the Simple
      String Comparison method defined in Section 6.2.1 of RFC 3986."

   o  Added one-time use, maximum lifetime, and specific subject and
      attribute requirements to Interoperability Considerations.

   draft-ietf-oauth-assertions-12

   o  Stated that issuer and audience values SHOULD be compared using
      the Simple String Comparison method defined in Section 6.2.1 of
      RFC 3986 unless otherwise specified by the application.

   draft-ietf-oauth-assertions-11

   o  Addressed comments from IESG evaluation
      https://datatracker.ietf.org/doc/draft-ietf-oauth-assertions/
      ballot/.

   o  Reworded Interoperability Considerations to state what
      identifiers, keys, endpoints, etc.  need to be exchanged/agreed
      upon.

   o  Added brief description of assertion to the into and included a
      reference to Section 3 (Framework) where it's described more.

   o  Changed such that a self-issued assertion must (was should) have
      the client id as the issuer.

   o  Changed "Specific Assertion Format and Processing Rules" to
      "Common Scenarios" and reworded to be more suggestive of common
      practices, rather than trying to be normative.  Also removed lots
      of repetitive text in that section.

   o  Refined language around audience, subject, client identifiers,
      etc.  to hopefully be clearer and less redundant.

   o  Changed title from "Assertion Framework for OAuth 2.0" to
      "Assertion Framework for OAuth 2.0 Client Authentication and
      Authorization Grants" to be more explicit about the scope of the

Campbell, et al.        Expires January 24, 2015               [Page 20]
Internet-Draft          OAuth Assertion Framework              July 2014

      document per http://www.ietf.org/mail-archive/web/oauth/current/
      msg11063.html.

   o  Noted that authentication of the client per Section 3.2.1 of OAuth
      is optional for an access token request with an assertion as an
      authorization grant and removed client_id from the associated
      example.

   draft-ietf-oauth-assertions-10

   o  Changed term "Principal" to "Subject".

   o  Added Interoperability Considerations section.

   o  Applied Shawn Emery's comments from the security directorate
      review, including correcting urn:ietf:params:oauth:grant_type:* to
      urn:ietf:params:oauth:grant-type:*.

   draft-ietf-oauth-assertions-09

   o  Allow audience values to not be URIs.

   o  Added informative references to draft-ietf-oauth-saml2-bearer and
      draft-ietf-oauth-jwt-bearer.

   o  Clarified that the statements about possible issuers are non-
      normative by using the language "Examples of issuers".

   draft-ietf-oauth-assertions-08

   o  Update reference to RFC 6755 from draft-ietf-oauth-urn-sub-ns

   o  Tidy up IANA consideration section

   draft-ietf-oauth-assertions-07

   o  Reference RFC 6749.

   o  Remove extraneous word per http://www.ietf.org/mail-
      archive/web/oauth/current/msg10029.html

   draft-ietf-oauth-assertions-06

   o  Add more text to intro explaining that an assertion grant type can
      be used with or without client authentication/identification and
      that client assertion authentication is nothing more than an
      alternative way for a client to authenticate to the token endpoint

Campbell, et al.        Expires January 24, 2015               [Page 21]
Internet-Draft          OAuth Assertion Framework              July 2014

   draft-ietf-oauth-assertions-05

   o  Non-normative editorial cleanups

   draft-ietf-oauth-assertions-04

   o  Updated document to incorporate the review comments from the
      shepherd - thread and alternative draft at http://www.ietf.org/
      mail-archive/web/oauth/current/msg09437.html

   o  Added reference to draft-ietf-oauth-urn-sub-ns and include
      suggestions on urn:ietf:params:oauth:[grant-type|client-assertion-
      type]:* URNs

   draft-ietf-oauth-assertions-03

   o  updated reference to draft-ietf-oauth-v2 from -25 to -26

   draft-ietf-oauth-assertions-02

   o  Added text about limited lifetime ATs and RTs per
      http://www.ietf.org/mail-archive/web/oauth/current/msg08298.html.

   o  Changed the line breaks in some examples to avoid awkward
      rendering to text format.  Also removed encoded '=' padding from a
      few examples because both known derivative specs, SAML and JWT,
      omit the padding char in serialization/encoding.

   o  Remove section 7 on error responses and move that (somewhat
      modified) content into subsections of section 4 broken up by
      authn/authz per http://www.ietf.org/mail-
      archive/web/oauth/current/msg08735.html.

   o  Rework the text about "MUST validate ... in order to establish a
      mapping between ..." per http://www.ietf.org/mail-
      archive/web/oauth/current/msg08872.html and http://www.ietf.org/
      mail-archive/web/oauth/current/msg08749.html.

   o  Change "The Principal MUST identify an authorized accessor.  If
      the assertion is self-issued, the Principal SHOULD be the
      client_id" in 6.1 per http://www.ietf.org/mail-
      archive/web/oauth/current/msg08873.html.

   o  Update reference in 4.1 to point to 2.3 (rather than 3.2) of
      oauth-v2 (rather than self) http://www.ietf.org/mail-
      archive/web/oauth/current/msg08874.html.

Campbell, et al.        Expires January 24, 2015               [Page 22]
Internet-Draft          OAuth Assertion Framework              July 2014

   o  Move the "Section 3 of" out of the xref to hopefully fix the link
      in 4.1 and remove the client_id bullet from 4.2 per
      http://www.ietf.org/mail-archive/web/oauth/current/msg08875.html.

   o  Add ref to Section 3.3 of oauth-v2 for scope definition and remove
      some then redundant text per http://www.ietf.org/mail-
      archive/web/oauth/current/msg08890.html.

   o  Change "The following format and processing rules SHOULD be
      applied" to "The following format and processing rules apply" in
      sections 6.x to remove conflicting normative qualification of
      other normative statements per http://www.ietf.org/mail-
      archive/web/oauth/current/msg08892.html.

   o  Add text the client_id must id the client to 4.1 and remove
      similar text from other places per http://www.ietf.org/mail-
      archive/web/oauth/current/msg08893.html.

   o  Remove the MUST from the text prior to the HTTP parameter
      definitions per http://www.ietf.org/mail-
      archive/web/oauth/current/msg08920.html.

   o  Updated examples to use grant_type and client_assertion_type
      values from the OAuth SAML Assertion Profiles spec.

Authors' Addresses

   Brian Campbell
   Ping Identity

   Email: brian.d.campbell@gmail.com

   Chuck Mortimore
   Salesforce.com

   Email: cmortimore@salesforce.com

   Michael B. Jones
   Microsoft

   Email: mbj@microsoft.com

Campbell, et al.        Expires January 24, 2015               [Page 23]
Internet-Draft          OAuth Assertion Framework              July 2014

   Yaron Y. Goland
   Microsoft

   Email: yarong@microsoft.com

Campbell, et al.        Expires January 24, 2015               [Page 24]