Skip to main content

CoRE Interfaces
draft-ietf-core-interfaces-01

The information below is for an old version of the document.
Document Type
This is an older version of an Internet-Draft whose latest revision state is "Expired".
Expired & archived
Authors Zach Shelby , Matthieu Vial
Last updated 2014-06-14 (Latest revision 2013-12-11)
Replaces draft-shelby-core-interfaces
RFC stream Internet Engineering Task Force (IETF)
Formats
Additional resources Mailing list discussion
Stream WG state WG Document
Document shepherd (None)
IESG IESG state Expired
Consensus boilerplate Unknown
Telechat date (None)
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

Abstract

This document defines well-known REST interface descriptions for Batch, Sensor, Parameter and Actuator types for use in contrained web servers using the CoRE Link Format. A short reference is provided for each type that can be efficiently included in the interface description attribute of the CoRE Link Format. These descriptions are intended to be for general use in resource designs or for inclusion in more specific interface profiles. In addition, this document defines the concepts of Function Set and Binding. The former is the basis element to create RESTful profiles and the latter helps the configuration of links between resources located on one or more endpoints.

Authors

Zach Shelby
Matthieu Vial

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)