MPLS-TP Next-Hop Ethernet Addressing
draft-fbb-mpls-tp-ethernet-addressing-01
Document | Type |
Replaced Internet-Draft
(individual)
Expired & archived
|
|
---|---|---|---|
Authors | Matthew Bocci , Dan Frost , Stewart Bryant | ||
Last updated | 2012-02-08 (Latest revision 2011-11-30) | ||
Replaced by | draft-ietf-mpls-tp-ethernet-addressing | ||
RFC stream | (None) | ||
Intended RFC status | (None) | ||
Formats | |||
Stream | Stream state | (No stream defined) | |
Consensus boilerplate | Unknown | ||
RFC Editor Note | (None) | ||
IESG | IESG state | Replaced by draft-ietf-mpls-tp-ethernet-addressing | |
Telechat date | (None) | ||
Responsible AD | (None) | ||
Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
The Multiprotocol Label Switching (MPLS) Transport Profile (MPLS-TP) is the set of MPLS protocol functions applicable to the construction and operation of packet-switched transport networks. This document presents considerations for link-layer addressing of Ethernet frames carrying MPLS-TP packets. This document is a product of a joint Internet Engineering Task Force (IETF) / International Telecommunication Union Telecommunication Standardization Sector (ITU-T) effort to include an MPLS Transport Profile within the IETF MPLS and PWE3 architectures to support the capabilities and functionalities of a packet transport network.
Authors
Matthew Bocci
Dan Frost
Stewart Bryant
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)